New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Los Angeles, CA | Hale Windows Los Angeles
We provide independent Mr-Glass window and door service across Los Angeles, from Studio City to San Pedro. The one thing that makes our Mr-Glass work here different: we match the repair to your specific microclimate. A Mr-Glass horizontal roller in Venice needs different hardware than the same window in Sherman Oaks, and we stock for both. Call (213) 269-5559 for a free estimate, or keep reading to understand what your windows are up against.
Why Los Angeles Residents Choose Us for Mr-Glass Service
We know Mr-Glass windows the way a mechanic knows a specific engine. We’ve pulled apart 7000 Series single hungs with warped sashes, rebuilt 9000 Series horizontal rollers crusted with Venice salt, and re-weatherstripped double hungs after Santa Ana seasons. Spencer Odell, our owner, grew up in Silverlake watching his father re-glaze single-pane windows in the craftsman bungalows off Hyperion Avenue, then trained in building construction technology at LA Trade-Tech on Washington Boulevard. That’s two-plus decades of Mr-Glass work across the LA Basin. We’re an independent Mr-Glass service provider, not manufacturer-affiliated or authorized, which means we answer to you, not a corporate warranty department. For everything from Mr-Glass sales & service to warranty-adjacent repairs, we tell you straight what the window needs.
Every estimate is written, line by line, before any work starts. Every repair carries a written guarantee. If a repair fails, the second visit is free. That’s how we’ve done it since 2009, and it’s the only way we’d let a stranger work on windows in our own homes.
Common Mr-Glass Windows & Doors Problems We Solve in Los Angeles
- Warped vinyl sashes on 7000/7900 Series windows. South-facing walls in Sherman Oaks, Encino, and Studio City bake all afternoon. Vinyl sashes on Mr-Glass single and double hungs can warp slightly under that prolonged direct sun, which throws the lock alignment off and lets air seep in around the meeting rail. We correct the alignment and, where the sash is too far gone, replace it with a properly specced unit.
- Gritty, corroded rollers on 9000 Series horizontal sliders. In Venice, Playa del Rey, and other beach zones, salt air and blown sand work their way into the lower track. Within 3 to 5 years, the roller assemblies bind, the panel drags, and eventually it jumps the track. We pull the panel, clean or replace the track, and install marine-grade stainless rollers that actually survive coastal conditions.
- Dried, cracked weatherstripping after Santa Ana winds. Low-humidity Santa Ana conditions bake the thermo-plastic weatherstripping on Mr-Glass double hungs until it cracks. Then the wind drives fine dust and particulate around the sash perimeters and onto your sills. We replace the seals with UV-resistant material and check the sash for proper compression.
- Hairline stress cracks in large fixed picture windows on hillside homes. Post-and-beam houses in Silver Lake, Echo Park, and Mount Washington settle constantly. If the original rough opening was over-shimmed, Mr-Glass fixed picture windows can develop hairline cracks at the corner blocks. We assess whether the crack is cosmetic or structural, then repair or replace accordingly.
- Rattling panels and loose hardware after seismic events. Los Angeles sits in a high-seismic zone. Even small quakes loosen Mr-Glass frame anchors and hardware over time. We re-secure, re-shim, and where a full-frame replacement is needed, we install with code-rated anchoring that accounts for LA’s soft-story lateral drift patterns.
Mr-Glass Service in Los Angeles: What Local Conditions Mean for Your Equipment
Here’s something a generic Mr-Glass page will never tell you. Los Angeles building code, under seismic retrofit requirements for pre-1994 wood-frame structures, demands something specific from Mr-Glass full-frame replacements on older Spanish-style and bungalow homes. The original rough openings on these houses were never designed for modern lateral drift. When we pull an old wood sash window out of a 1920s Spanish casita in Highland Park, we’re not just dropping in a Window Replacement - Los Angeles unit. We’re cutting custom reveal shims and placing anchors to satisfy both current code and the way that particular house moves during a quake. Skip that step and the window looks fine for two years, then the stucco cracks around the frame and the sash binds. Measure it right the first time, or you’ll be measuring it twice and paying for it either way. That’s the difference between a handyman with a caulk gun and a team that’s done this across every neighborhood from Eagle Rock to the South Bay.
Our crew on a 1950s post-and-beam in Silver Lake found a Mr-Glass 9000 Series horizontal roller that had popped off its lower track because the original install used drywall screws instead of structural framing anchors at the sill. We pulled the panel, reset the track with code-rated wedge anchors, and replaced the crushed roller assemblies with marine-grade stainless units. After a Santa Ana, that same panel had been rattling and letting in fine dust. Now it glides with a finger push.
Mr-Glass Models & Products We Service in Los Angeles
We service the full Mr-Glass residential line, including the 7000 Series Single Hung, 7900 Series Double Hung, 9000 Series Horizontal Roller, and 8700 Series Casement. Our parts approach is simple: genuine Mr-Glass components first. Balances, locks, rollers, and weatherstripping are precision-fit, and aftermarket parts that don’t match the original profile cause more problems than they solve. For out-of-production Mr-Glass lines, we use proven aftermarket equivalents that match the original extrusion without filing metal or modifying the sash. We stock common Mr-Glass hardware locally for fast Los Angeles Window Repair turnaround, and we advise full replacement only when the vinyl is UV-degraded beyond safe re-glazing or the frame is so racked from seismic movement that a repair would be a short-term band-aid.
Mr-Glass Service Pricing in Los Angeles
| Service | Typical Price Range |
|---|---|
| Weatherstripping replacement (per window) | $85 – $185 |
| Balance or spring replacement (double hung) | $120 – $240 |
| Roller assembly replacement (horizontal slider) | $150 – $300 |
| Lock or latch replacement | $60 – $140 |
| Full-frame Mr-Glass replacement (per opening) | $900 – $2,800+ |
What actually drives your cost: the model, whether parts are in current production, and how much the local climate has done to the frame. A Venice slider that needs marine-grade rollers costs more than a Sherman Oaks double hung that needs new weatherstripping. Your free estimate includes a full inspection, an honest repair-vs-replace recommendation, and a written line-item price locked in before any work begins. Call (213) 269-5559 to schedule yours.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Los Angeles
Yes. Salt air and blown sand in Venice, Playa del Rey, and Santa Monica corrode roller assemblies and coat tracks with grit within 3 to 5 years, while the same Mr-Glass 9000 Series rollers inland can last a decade or more. Coastal homes should budget for marine-grade stainless roller replacements as a maintenance item, not an emergency. Call (213) 269-5559 for an inspection if your panels are starting to drag.
In most cases, yes. A sash that won’t stay up is almost always a failed balance, and Mr-Glass balances are replaceable components. We replace the balance pair (both sides, since the other usually follows), and the sash holds like new. The whole window only needs replacing if the vinyl is UV-degraded or the frame is racked. Call (213) 269-5559 and we’ll tell you which situation you have.
The whistling is air infiltration through cracked or compressed weatherstripping. Santa Ana’s low humidity dries Mr-Glass thermo-plastic seals until they crack, then high winds force air through the gaps around the sash. Replacing the weatherstripping with UV-resistant material stops the whistle and keeps the fine dust out. Call (213) 269-5559 to schedule a weatherstripping replacement.
Yes. Hillside homes in Silver Lake, Echo Park, and Mount Washington settle constantly, which means Mr-Glass frames are more likely to have racked openings, over-shimmed rough openings, or hairline stress cracks at corner blocks. Flats homes deal more with sun and dust. Hillside service requires checking the rough opening geometry, not just the window hardware. Call (213) 269-5559 if your hillside windows are binding or showing corner cracks.
Yes, if the frames are still sound. We can re-glaze with low-E glass (a thin coating that blocks heat while letting light through) and replace the weatherstripping while keeping the original Mr-Glass frame and hardware. If the frames have UV-degraded beyond safe re-glazing, a full-frame replacement with a matching Mr-Glass profile preserves the look. Call (213) 269-5559 for a free assessment.
Service Areas Near Los Angeles
We serve Los Angeles proper and the surrounding communities. That includes Gardena, where we handle Mr-Glass service in Gardena, and Studio City, where Mr-Glass service in Studio City covers the Valley side. We also work throughout South Gate, Culver City, and Palms. Not sure if we cover your block? Call us.
For the full list of neighborhoods and ZIP codes we serve, see our Los Angeles service area page.
Book Your Mr-Glass Service in Los Angeles Today
Call (213) 269-5559 to schedule your free, written Mr-Glass estimate. We’ll send a named, photo-badged technician, inspect your windows, and put the price in writing before any work starts. One call, no obligation, and you’ll know exactly what your Mr-Glass windows need.
Written by Spencer Odell, Owner at Hale Windows Los Angeles, serving Los Angeles and the surrounding communities since 2009.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.