New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Gardena, CA | Hale Windows Los Angeles
We’re an independent Mr-Glass service provider based in Los Angeles, and we work on Mr-Glass windows and doors across Gardena, including Hollypark and Moneta. The one thing that makes our Mr-Glass work here different is that we know the exact mid-century models these tract homes were built with. So when you call us at (213) 269-5559 about a stuck awning crank or a fogged 5000 Series sash, we already know what’s behind that stucco wall before we arrive.
Why Gardena Residents Choose Us for Mr-Glass Service
We’ve spent more than a decade working on Mr-Glass window and door systems across Gardena. That’s field experience, not manufacturer training. We know the 3000 Series horizontal roller frames, the 5000 Series single hungs, and the 7000 Series awnings the way you know the layout of your own kitchen. Spencer Odell, our owner, grew up watching his father re-glaze single-pane windows in the craftsman bungalows off Hyperion Avenue, then trained in building construction technology at LATTC on Washington Boulevard. The man has spent two-plus decades measuring, hanging, and weatherstripping windows across the LA Basin. When a Gardena homeowner calls about a Mr-Glass window that won’t close, he’s the guy who shows up with the right rough-opening numbers the first time. That matters when you’re dealing with 1960s tract homes that never had a standard-size opening to begin with.
For a deeper look at what we do with this brand, see our Mr-Glass sales & service overview.
Common Mr-Glass Windows & Doors Problems We Solve in Gardena
- Corroded weep holes on 3000 Series horizontal rollers. Gardena’s marine layer keeps mornings damp well into the afternoon. Original aluminum frames on 3000 Series rollers develop corrosion at the weep holes, which blocks drainage and sends water inside. We clean the channels, treat the corrosion, and re-drill the weep holes when they’re beyond saving.
- Warped vinyl glazing beads on 5000 Series single hungs. Five decades of sun, even Gardena’s mild version, makes the original glazing beads brittle. They crack when you try to remove the glass, and then the sash won’t seal. We carry replacement beads that match the original profile, so the repair doesn’t end up looking like an afterthought.
- Stripped crank mechanisms on 7000 Series awnings. This is the Hollypark special. Original crank-out awning windows from the 1960s have worm gears that strip and torque bars that bend. The hardware was built for a lighter sash, and the salt-tinged air doesn’t help. We replace the operators with the correct spline count and adjust the hinge tension.
- Seized rollers on 3000 Series sliders near the 405 and 110. Dust and fine grit from freeway traffic work into the roller tracks over time. The rollers seize, and suddenly a window that should slide with two fingers needs two hands and a hip check. We swap in new roller assemblies and clean the track so it stays smooth.
- Fogged IGU units on 5000 Series double-hungs. Failed insulated glass shows up as condensation between the panes that never clears. In Gardena, the temperature swing between cool marine mornings and warm afternoons makes a failed seal obvious fast. We measure, order, and install replacement IGUs without changing the frame.
Mr-Glass Service in Gardena: What Local Conditions Mean for Your Equipment
The Hollypark neighborhood of Gardena has one of the highest concentrations of original Mr-Glass awning windows in the county. That’s not marketing copy. Walk down any street south of Rosecrans and you’ll see the same crank-out 7000 Series units that went in when these stucco ranches were built. Here’s what that means in practical terms: our local hardware suppliers in Gardena keep a dedicated stock of the often-discontinued crank operators and torque bars specifically because these homes still rely on them. A homeowner in Torrance with the same window might wait two weeks for a part. In Gardena, it’s usually sitting on a shelf five minutes from the job site. That local inventory is the difference between a window that’s stuck for a month and a window that opens before the weekend.
Mr-Glass Models & Products We Service in Gardena
We work on the full spread of Mr-Glass lines that Gardena’s housing stock actually contains. That includes the 3000 Series Horizontal Roller, the 5000 Series Single Hung, the 7000 Series Awning, and the 2000 Series Casement. We prioritize OEM Mr-Glass hardware and glass whenever the lead time and cost make sense for you. But we also keep a local inventory of aftermarket rollers, balances, and weatherstripping that match the exact specs of Gardena’s common mid-century models. Since many original Mr-Glass frames from this era are still structurally sound, we recommend replacing the sash or hardware rather than the entire frame when possible. If you want an energy upgrade to a modern low-E unit, we’ll give you an honest price comparison between repair and replacement so you can decide with real numbers in front of you.
Mr-Glass Service Pricing in Gardena
Most Mr-Glass repairs in Gardena land between $95 and $425, depending on what failed. Replacing a stripped awning crank operator typically runs $95 to $185. A seized roller assembly on a horizontal slider usually costs $145 to $265. A failed IGU on a 5000 Series sash runs $225 to $425 for the glass and install. Full-frame replacement for a Mr-Glass window in a stucco tract home starts around $900 and goes up based on size and glass package. What drives the cost here is custom sizing: the rough openings in 1950s and 60s Gardena homes were rarely standard, so the sash or frame often has to be cut to fit. Every estimate is written, line-item, and fixed before we pick up a tool. If a repair fails, the second visit is free, and every job sits under our 365-Day Done Right Promise. Call (213) 269-5559 for an exact quote, and we’ll put it in writing before you commit to anything.
Serving Gardena, CA - Our Local Coverage Area
We’re based in the Gardena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Gardena
Yes. Our Gardena hardware suppliers stock the crank operators, torque bars, and hinge hardware for the original 7000 Series awning windows because so many Hollypark and Moneta homes still have them. When a part is truly discontinued, we match an aftermarket equivalent with the correct spline count and torque rating, then test it in the frame before we call the job done. Call (213) 269-5559 and tell us what year your house was built; we’ll tell you what we can get and what it costs. Estimates are free.
It’s common but not something you should live with. Gardena’s marine layer adds moisture, and proximity to the 405 and 110 adds fine dust. Together, they corrode and clog the roller assemblies on 3000 Series sliders. We clean the track, replace the rollers, and lubricate the assembly with a dry silicone so the grit doesn’t stick again. The repair usually takes about an hour per window. Call (213) 269-5559 for a fixed price before we start.
Yes. If your original Mr-Glass frame is square and structurally sound, we can install a new low-E IGU (a thin coating that blocks heat while letting light through) into the existing sash. That’s a common upgrade for Gardena homeowners who want Title 24 compliance without tearing out stucco. Call (213) 269-5559 and ask for a glass-upgrade quote; we’ll need the rough-opening measurements and the model series, and we’ll take it from there.
If the frame is solid and the issue is hardware, glass, or weatherstripping, repair is almost always the better value. Original Mr-Glass frames from that era were built with heavier aluminum than most modern equivalents. Where replacement makes sense is when the homeowner wants a full energy retrofit or the frame has corrosion that’s gone too far to patch. We’ll give you a written price for both repair and replacement so you can compare them side by side. Call (213) 269-5559 for that estimate.
Yes, and this is one of the most common jobs we do in Gardena. The post-war tract homes here were built with rough openings that don’t match modern standard sizes, so retrofitting means custom-sizing the frame or using an appropriate fill strategy. We measure to the eighth of an inch and cut the new unit to match the opening, not the other way around. Measure it right the first time, or you’ll be measuring it twice and paying for it either way. Call (213) 269-5559 and we’ll schedule a measurement visit. Free.
Last March, our crew was called to a 1962 ranch on W 146th St in Moneta where the owner couldn’t open three Mr-Glass 7000 Series awning windows above the kitchen sink. Two had completely stripped worm gears in the crank operators, and the third had a bent torque bar wedging the sash against the frame. We removed the old operators, installed new aftermarket operators with the correct spline count from our Gardena supplier, and replaced the bent torque bar. Then we cleaned the original hinges and adjusted the tension so the windows opened smoothly for the first time in years. That job took one afternoon, and the parts came from fifteen minutes away.
Service Areas Near Gardena
We run Mr-Glass service across Gardena and into the surrounding South Bay and central LA neighborhoods: Gardena service area, Mr-Glass service in Studio City, Mr-Glass service in Los Angeles, plus South Gate, Culver City, and Palms. If you’re near the 110 or the 405 corridor, we can probably be at your door this week.
Book Your Mr-Glass Service in Gardena Today
We’re an independent Mr-Glass service provider, not manufacturer-affiliated or authorized, and every job comes with a written price before work starts and a written guarantee on any repair. Call (213) 269-5559 to schedule your free estimate. A live person answers, and we’ll give you the exact price before you decide anything.
Written by Spencer Odell, Owner at Hale Windows Los Angeles, serving Gardena since 2009.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.