New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Studio City, CA | Hale Windows Los Angeles
We provide independent Mr-Glass window and door service across Studio City, from Studio City Window Repair on original 1950s casements to full-frame replacement of thermally bowed sliders. What makes our Mr-Glass work different here is simple: we know how these units fail on sun-baked hillsides and mid-century ranches, and we give you a straight answer on whether to repair or replace before anyone picks up a tool. Call (213) 269-5559 for a free estimate.
Why Studio City Residents Choose Us for Mr-Glass Service
Spencer Odell, our owner, grew up in Silverlake watching his father re-glaze single-pane windows in the craftsman bungalows off Hyperion Avenue. That’s the kind of hands-on familiarity we bring to Mr-Glass service in Studio City. These are original aluminum and vinyl units, mostly installed in the 1950s and 60s, and they fail in predictable ways after six decades of Valley sun. We know the failure modes because we see them weekly, not because we read about them in a manual.
We’re an independent Mr-Glass service provider, which matters more than most people realize. We are not manufacturer-affiliated or authorized, and that is exactly what lets us choose the best fix for each unit. When an OEM part is the right call, we use it. When an aftermarket roller or weatherstripping will outperform the original in Studio City’s heat and dust, we install that and tell you why. Nobody at a corporate service desk is making that call. Our techs are, on your doorstep, with a written price in your hand before work starts. That is the Mr-Glass sales & service standard we hold ourselves to across every job in the LA Basin.
Common Mr-Glass Windows & Doors Problems We Solve in Studio City
- Thermally bowed sashes on west-facing walls. Original Mr-Glass single-pane aluminum frames absorb brutal afternoon heat in Studio City summers. The metal expands, the sash binds, and the weep holes misalign, so you get a window that won’t open and leaks when it rains. We straighten the frame with a routing fixture when the aluminum is still sound, and we tell you plainly when it isn’t.
- Stripped crank-out casement operators. Hillside homes off Laurel Canyon are full of 1950s Mr-Glass 8050 casement windows whose gear mechanisms have been sun-baked for decades. The gears strip, the window sticks open or shut, and forcing the crank only breaks it worse. We replace the operators and the compression weatherstripping, and the window locks again without a fight.
- Dragging horizontal roller sashes. Canyon winds push fine dust into the bottom tracks of Mr-Glass 7300 horizontal rollers. That dust grinds the nylon rollers down until the sash drops and scrapes against the frame every time you open it. We clean the track, replace the rollers with aftermarket units that hold up better in dust, and reset the sash height.
- Condensation and dry-rot at sliding door thresholds. Non-thermal-break Mr-Glass 9500 sliding glass doors from the 1960s sweat heavily on cool Valley mornings. The condensation runs down the glass, pools at the threshold, and rots the subfloor. We catch this early, replace the threshold and weatherstripping, and fix the underlying thermal issue if the frame allows it.
- Corroded insect screens fused into frames. This one is specific to hillside streets like Dilling Street and Wrightwood Lane. Original exterior screens on Mr-Glass casements corrode into the aluminum channel after decades of exposure, and getting them out often means cutting the screen channel itself. Our techs do this weekly. It is a pain point you will not hear about from a flatland Valley contractor who never sees it.
Mr-Glass Service in Studio City: What Local Conditions Mean for Your Equipment
Studio City’s housing stock is dominated by single-family homes built in the 1940s through the 1960s, and a lot of those original Mr-Glass units are still hanging on. The local climate works against them in two specific ways: hot, dry summers put relentless solar heat on west-facing glass, and canyon winds off Laurel Canyon create pressure differences that expose every gap in old weatherstripping. On hillside streets like Dilling Street and Wrightwood Lane, we routinely find exterior insect screens corroded so badly into their aluminum frames that replacement requires cutting out the screen channel. That is a job our techs do weekly, and it is one you will not find in a flatland city like Sherman Oaks. If your home still has original single-pane Mr-Glass windows, they are doing almost nothing to block that heat gain, and the frames may already be too bowed to salvage. We will tell you which side of the repair-or-replace line your windows sit on, in plain words, with a written quote in hand.
Mr-Glass Models & Products We Service in Studio City
We service every Mr-Glass line commonly found in Studio City homes: the 3900 Series Single Hung, the 7300 Series Horizontal Roller, the 8050 Series Casement, and the 9500 Series Sliding Glass Door. We also handle energy-efficient upgrades, full frame replacement, and casement window service on all of them. For parts, we use OEM when it makes sense and is price-competitive, especially for unique operators, locks, and weep covers. But we will not hesitate to install high-quality aftermarket rollers, glazing, or weatherstripping that outperforms the original in Studio City’s dust and heat. We keep common Mr-Glass parts stocked locally, which means fast turnaround without waiting on a warehouse shipment from across the country.
Mr-Glass Service Pricing in Studio City
Mr-Glass window and door service in Studio City typically runs between $180 and $340 for a common repair, like replacing stripped casement operators or dragging roller assemblies. Full-frame replacement of an original Mr-Glass unit with a modern low-E, thermally broken window runs higher, and the final number depends on frame size, access, and whether we are matching existing sightlines or redoing the opening. A free estimate includes a written line-item price before any work begins, so you know exactly what you are paying and why. No change orders, no surprise invoice. Call (213) 269-5559 for an exact quote.
Serving Studio City, CA - Our Local Coverage Area
We’re based in the Studio City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Studio City
In most cases, we can repair the original crank operators. The gear mechanisms strip from decades of sun-baked expansion, but the frames are often still square. We replace the operator and the compression weatherstripping, and the window locks again without forcing it. If the frame itself is bowed or the glazing has failed, we will tell you that replacement is the honest answer. Call (213) 269-5559 and we will assess it for free.
The most effective fix is replacing the weatherstripping and, if the frames allow, upgrading to modern low-E glass with a proper thermal break. Canyon winds expose every gap in old, compressed weatherstripping, and no amount of caulk will fix that. We assess the frame condition first and give you a repair-or-replace answer in plain words.
Film can reduce some heat gain, but it will not fix a thermally bowed frame or failed glazing. In Studio City’s summer heat, original single-pane Mr-Glass units on west-facing walls are the biggest energy leak in the house. If your frames are still square, we can upgrade the glazing. If they have bowed, Window Replacement - Studio City is the only way to get real savings. Call (213) 269-5559 for an honest assessment.
We replace the rollers and clean the track first. Canyon dust grinds the nylon rollers down until the sash drags, but the track itself is usually fine. If the track has been damaged by years of metal-on-metal scraping, we will tell you and quote a track replacement as a separate line item.
Yes. We match sightlines, frame color, and sightline profiles as closely as modern products allow. We carry several lines that complement the original 1950s Mr-Glass look without sacrificing energy performance. Call (213) 269-5559 and we will show you samples at your home.
Service Areas Near Studio City
We provide Mr-Glass window and door service throughout Studio City service area and the surrounding neighborhoods. If you are in Mr-Glass service in Los Angeles proper, we cover that too. South and west of Studio City, we also handle jobs in Mr-Glass service in Gardena, Culver City, South Gate, and Palms.
Book Your Mr-Glass Service in Studio City Today
Call (213) 269-5559 to schedule your free Mr-Glass estimate in Studio City. We will send a background-checked, photo-badged technician by name and photo before the visit, and you will get a written price before any work begins.
Written by Spencer Odell, Owner at Hale Windows Los Angeles, serving Studio City since 2009.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.