New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Front Door Replacement Across Palms
Front door replacement in Palms typically runs $1,800 to $5,400 depending on door material, frame condition, and whether the existing jamb needs rebuilding. Most Palms homeowners we serve choose either a fiberglass entry door with impact-rated glazing or a steel door for the security-conscious blocks near Venice Boulevard and Motor Avenue. We know this neighborhood’s housing stock cold, from the 1920s Spanish Colonials on Keystone Avenue to the 1960s dingbat apartments off National Boulevard. Call (213) 269-5559 and we’ll walk your block, check your threshold, and put a written price in your hands before any work starts.
Why Hale Windows Los Angeles Is Palms’s Preferred Front Door Replacement Company
Palms homeowners keep calling us because we do something most door companies won’t: we tell you exactly who’s coming to your door before they arrive. Every technician sent to a Palms home is background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo. That’s our Threshold Standard, and in a neighborhood where many residents are home alone during the day or have young children, it matters more than a slick brochure.
We’ve been replacing front doors since 2009, and we’re independently owned and operated as part of the Threshold Group family of home-service brands. That means no franchise playbook, no rotating subcontract crews. The same Hale team that quotes your Palms job is the team that installs it. And every job, from a simple slab swap on a dingbat apartment to a full jamb rebuild on a 1930s Craftsman, carries our 365-Day Done Right Promise: if it’s not done right, we make it right. No argument, no invoice shuffle.
Our Palms customers also get something rare in this trade: a written price before any tool comes off the truck. Not an estimate range, not a “we’ll see how it goes.” A line-item price. If you want to compare it against two other bids, go ahead. We’ll stand behind the number because we know what Palms door jobs actually involve.
Front Door Installation in Palms
Front Door Installation in Palms usually means pulling an old, failed door slab and hanging a new one in the existing frame, provided the jamb and threshold are still sound. On many Palms blocks, though, the jamb isn’t sound. We regularly find rot at the bottom of original 1920s fir jambs where marine-layer moisture wicked into unsealed end grain. In those cases we rebuild the jamb with pressure-treated lumber, flash the threshold correctly, and only then hang the new door. A straightforward slab replacement in Palms runs $1,800 to $3,200; a full jamb rebuild with new threshold and exterior trim pushes $3,500 to $5,400.
The Right Door Material for Palms Air
Fiberglass doors hold up best here. They don’t swell in the morning fog, they don’t warp under the intense west-facing afternoon sun, and they can be ordered with impact-rated laminated glass that quiets I-10 noise. Steel doors are a close second for security, and we spec them with factory-applied marine-grade primer because Palms’ salt air finds bare steel quickly.
What Takes a Day, What Takes Two
A clean slab swap is a one-day job. A jamb rebuild, new threshold, and exterior trim usually takes two days including paint or stain cure time. We’ll tell you which one you’re getting before we start, and the written quote reflects it.
Entry Door Installation in Palms
Entry Door Installation in Palms often goes beyond the slab, because the neighborhood’s pre-war homes were built with single-pane wood doors that leak air, rattle in the coastal breeze, and offer zero security against a determined kick. When we install an entry door system here, we address the entire opening: the slab, the frame, the weatherstripping, the threshold, and the exterior trim. Entry door system replacements in Palms run $3,000 to $6,500 depending on glass options, sidelights, and frame work.
Doors With Glass Need Palms-Spec Glazing
If your entry door has glass panels or sidelights, we order them with laminated, impact-rated interlayers. That’s not just for storm season. It’s for the daily reality of living near a freeway: laminated glass cuts I-10 road noise by roughly half compared to single-pane annealed glass, and it holds together if someone throws a rock at it.
Security Screens Come Off First
On many Palms doors, there’s a 1990s wrought-iron security screen anchored over the entry. Those screens were usually fastened with carbon steel screws that, after three decades of Palms marine air, have rusted solid. We cut the old anchors, remove the screen carefully, replace the door, then re-anchor the screen with stainless fasteners so it doesn’t become a future headache. This step is specific to Palms and a few neighboring blocks; two miles west in Culver City, you rarely see these screens.
Trusted Brands We Service in Palms
We install and service front doors from Therma-Tru, PGT, and CGI because those three lines give Palms homeowners the right mix of coastal durability, impact ratings, and design flexibility. Therma-Tru fiberglass doors are our most-requested option for 1920s and 1930s homes because they can be ordered with classic panel profiles that match original Spanish Colonial proportions. PGT and CGI bring the impact-rated glazing and hardware options that hold up to salt air. Because we stock common Palms parts locally, we can often complete a door replacement without waiting on a two-week factory order. No single-brand hard sell: we match the door to your house, your security screen, and your budget.
Common Front Door Replacement Problems We See in Palms Homes
- Bottom rail rot from marine-layer moisture. Original 1920s wood doors fail at the bottom rail first because unsealed end grain wicks fog moisture upward. Within two decades, the rail is soft enough to push a screwdriver through. There’s no filler for this; the door comes out.
- Corroded aluminum frames on 1960s dingbats. Salt air attacks the weld points on old aluminum door frames, leaving them impossible to adjust or weatherstrip. The door binds, the frame is shot, and both get replaced.
- Rusted wrought-iron security screens. The 1990s screens on many Palms rentals and older homes are anchored with carbon steel screws that rust solid in the coastal air. The screen often has to be cut free before the door slab can be removed.
- Sticking doors that swing freely by afternoon. Morning fog makes wood doors swell; afternoon heat dries them out. The cycle repeats daily, and by the time a Palms homeowner calls us, the door has been planed so many times it no longer seals.
Pricing for Front Door Replacement in Palms, CA
A basic slab replacement on a 1960s dingbat apartment door runs $1,800 to $2,800. A mid-range fiberglass entry door with one or two panels of impact-rated glazing, new weatherstripping, and a rebuilt threshold runs $3,200 to $4,800. A full entry system on a 1920s Spanish Colonial with jamb rebuild, sidelights, and re-anchored security screen runs $4,500 to $6,500. What moves the price: frame condition, impact glazing, whether your security screen needs stainless re-anchoring, and how much of the original trim is salvageable. We’ll give you a written price for your specific door before any work begins. Call (213) 269-5559 to schedule a free in-home measure and quote.
We Also Serve Cities Near Palms
Our crews work throughout the Westside and South Bay. If you’re in Los Angeles, Gardena, Studio City, or South Gate, the same Front Door Replacement team handles your job. Scheduling and dispatch are coordinated from our Los Angeles office, and the exact same written-price policy and 365-Day Done Right Promise apply. For Palms-specific service details, see our Front Door Replacement in Palms page.
Serving Palms, CA - Our Local Coverage Area
We’re based in the Palms area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Front Door Replacement in Palms
If your Palms home sits in a local preservation overlay and the original glazing or door proportions are protected, yes, you may need a permit or design review before swapping the door. We’ll check the overlay status for your specific address and handle the paperwork if it’s required. A like-for-like replacement that matches original panel profiles and glass dimensions usually sails through faster than a dramatic style change. Call (213) 269-5559 and we’ll look up your block.
Yes. Therma-Tru makes fiberglass doors with Craftsman panel profiles and vertical plank details that read as original from the street, but with an impact-rated laminated glass interlayer and modern weatherstripping. We’ve done this on bungalows off Motor Avenue and along Keystone Avenue, and the result looks period-correct without the rot problems of the original fir slab. The original door is usually beyond saving by the time we’re called, but we can photograph and template it before removal to match the sightlines.
The best replacement is a fiberglass or steel door with a fixed or laminated-operable window, because the old aluminum frame is typically too corroded to hold new weatherstripping. Jalousie windows leak air, rattle, and offer almost no security. We swap the whole opening, including a new pressure-treated jamb and stainless threshold. Plan on $2,800 to $4,500 for this job in Palms, depending on the glass you choose. Call (213) 269-5559 and we’ll measure the exact opening.
The marine-layer fog that rolls into Palms overnight swells wood doors, and the afternoon sun dries them back out. Over time, that daily swell-shrink cycle loosens joints and the only fix most homeowners try is planing the door thinner, which makes the air leak worse. A fiberglass door doesn’t swell, doesn’t shrink, and closes the same way in July and January. If you’re tired of shoulder-checking your own front door, call (213) 269-5559 for a free measure.
Yes. A solid-core fiberglass or steel door with laminated, impact-rated glazing cuts I-10 road noise far better than a single-pane wood door or a hollow steel slab. The laminated glass interlayer is the key: it absorbs sound energy that ordinary annealed glass just transmits. Many Palms homeowners notice the difference the first night after installation. We’ll spec the right glass package for your street’s noise level, from Palms Boulevard up to the blocks directly under the freeway.
Written by Spencer Odell, Owner at Hale Windows Los Angeles, serving Palms since 2009.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.