New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Sliding & Patio Doors: The Los Angeles Owner’s Guide
We stock, install, and service ES Windows sliding and patio door parts across Los Angeles, with most roller, track, and lock replacements running $185 to $520 installed depending on the component and your door’s size. The typical repair takes under two hours once we’re at your home, and we carry the most common ES Windows sliding door parts on our trucks so we’re not making you wait on a second visit. Most Los Angeles homeowners call us when the door starts grinding on the track, needs a hip-check to move, or won’t latch securely at night. You feel it before you see it: the extra pull, the catch mid-slide, the lock that spins without grabbing.
Which ES Windows Models This Applies To
ES Windows builds sliding and patio doors in a few distinct series, and the part you need depends on which one you have. The most common installations we service in Los Angeles are the ES 3000 and ES 5000 sliding door lines, plus their heavier multi-panel patio configurations. Here’s the compatibility gotcha that trips people up: ES Windows uses different roller assemblies between the 3000 and 5000 series, and the roller diameter off by even a quarter-inch means the door sits too low or binds at the top track. The quickest way to identify your model is the sticker on the interior edge of the door panel, usually near the lock stile; if that’s gone, the glass etching in the corner will still have the ES logo and a serial number we can decode. For rollers, tracks, and handles, we lean OEM when the door is under ten years old and the part is still in production; for older ES units where OEM stock has dried up, we use quality aftermarket equivalents machined to the same track dimensions. We’ll show you the difference and the price on both before anything gets ordered.
Signs Your ES Windows Sliding & Patio Doors Is Failing
- The door drags or requires a hard shove. Roller wheels have flat-spotted or seized, often because coastal LA salt air and fine dust from the Santa Anas grind into the bearings over years. You’re now wearing the track itself, which turns a $40 roller job into a $300 track replacement if ignored.
- The door jumps or shudders mid-slide. The track has a worn or pitted section, usually where the door spends most of its life in one position. Los Angeles homes with older aluminum tracks see this most often because years of weight concentration deform the metal.
- Drafts around the closed door, even with the lock engaged. Weatherstripping along the stile and header has compressed or torn, and in CA’s dry climate, that foam degrades faster than the rubber. You’re paying for conditioned air that’s leaving through the door.
- The lock turns but doesn’t throw the bolt all the way. Interior lock linkage has bent or the strike plate has shifted because the door’s sagging by a few millimeters. This is the one that matters most for security on ground-floor Los Angeles rentals and homes.
- Condensation between the glass panes. The sealed unit has failed. That’s not a parts-and-lube fix; it’s an insulated glass replacement, and we’d quote it separately with the door disassembled on site.
Replacement Cost & What’s Included
Here’s the honest pricing picture for Los Angeles, based on the ES Windows sliding and patio door work we’ve done across the basin:
- Roller replacement (pair): $185 to $280 installed
- Track repair or section replacement: $220 to $420 installed
- Lock and handle assembly replacement: $160 to $260 installed
- Weatherstripping replacement (full door): $140 to $220 installed
- Door realignment and tune-up: $175 to $250, included free if we’re already on site for another part
The range depends on the ES series, panel count, and whether your rollers are single-wheel or tandem units. Every quote is written before we touch a tool: parts listed line by line, labor included, no change orders. If the repair fails within the year, the second visit is free, in writing, on every invoice. That’s part of our 365-Day Done Right Promise: if it isn’t right, we make it right, no argument needed.
DIY or Call Us?
You can safely check three things without much tool skill: clean the bottom track with a vacuum and a stiff brush, confirm the lock’s strike plate screws are snug, and note whether the door sags visibly in the open position. What you shouldn’t attempt is lifting a sliding panel out by hand. A full ES Windows sliding panel weighs 150 to 280 pounds, and the wrong lift angle will strip the adjustment screws or drop the panel onto the track, your feet, or worse. They’re not spring-loaded like a garage door, but the weight is the hazard, and every glazier in Los Angeles has a story about a homeowner who thought they could muscle it back in alone. If it’s grinding, sagging, or the lock won’t throw, call us at (213) 269-5559. Spencer Odell grew up in Silverlake watching his dad re-glaze single-pane windows in those craftsman bungalows off Hyperion Avenue, and he’s still the one who says it straight: measure it right the first time, or you’ll be measuring it twice and paying for it either way.
FAQs
Realistically, 8 to 14 years in the LA basin, shorter near the coast where salt air works on the bearings, and shorter still in hillside homes that sit in Santa Ana wind paths that blow fine grit into the track. If your door’s past the decade mark and starting to drag, the rollers are done. Call (213) 269-5559 and we’ll confirm it on site.
Yes, in the vast majority of cases. Rollers, tracks, locks, handles, and weatherstripping are all replaceable as individual components, and we’d rather swap a $250 lock than sell you a $3,800 door you don’t need. The exception is a blown glass unit or a frame so warped the panel won’t seat; then we’ll quote a full door and show you the numbers side by side.
Most roller, lock, or weatherstripping replacements run 45 minutes to two hours on site. Track section replacements run longer, up to half a day, because we wait for fresh track sealant to set before re-hanging the panel. We’ll give you the time estimate in writing with your quote before any work starts.
Yes. Our techs carry the most common ES Windows rollers, lock assemblies, and weatherstripping profiles for the 3000 and 5000 series, plus aftermarket equivalents for older units. If we don’t have your specific part, we source it from our Los Angeles supplier within one to two business days and finish the job on the follow-up visit. Call (213) 269-5559 for a free estimate and we’ll tell you over the phone whether it’s a same-day fix or a parts-order job.
We also stock and service parts for PGT, CGI, and CWS sliding door lines if you have more than one brand in your home.
Written by Spencer Odell, Owner, Hale Windows Los Angeles at Hale Windows Los Angeles, serving Los Angeles and nearby areas.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.