New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Sliding & Patio Doors: The Los Angeles Owner’s Guide
We stock and install ECO Window Systems-compatible sliding and patio door parts across Los Angeles, with most roller, track, and handle replacements running $180 – $520 installed depending on your door’s series and what’s actually failed. The call usually starts the same way: a door that used to glide now takes a shoulder to move, or a lock that won’t catch because the door has sagged half an inch out of square. If you’re opening and closing an ECO Window Systems slider by force, the part you’re fighting is telling you something, and it’s cheaper to hear it now than after the glass stresses and the frame gets chewed up. The good news: we carry the common ECO Window Systems replacement parts on our trucks, so most Los Angeles jobs are done in one visit.
Key Takeaways:
- Most ECO Window Systems sliding door repairs in Los Angeles run $180 – $520 installed, parts and labor included.
- We stock common ECO Window Systems rollers, handles, locks, and track caps on the truck for same-visit fixes.
- Roller failures account for roughly 8 out of 10 slider problems we see across the LA Basin.
- We’re an independent service provider, not affiliated with ECO Window Systems, and we carry parts across eight door and window brands.
- Every repair is quoted in writing before work starts, and backed by our 365-Day Done Right Promise.
Which ECO Window Systems Models This Applies To
ECO Window Systems builds sliding and patio doors across several series lines, and the part that fits one won’t necessarily fit another. In Los Angeles, we most often see the ECO 7500 and 9800 slider lines in single-family homes and condo conversions, plus a lighter ECO 5500 series in apartment and ADU work. The quickest way to identify yours is the silver label on the door’s top rail or the edge of the panel, which carries a series number and usually a glass construction code. If that label is gone, we measure the roller housing width and the stile groove profile, which narrows it down fast.
On OEM versus aftermarket: ECO Window Systems uses a side-mounted adjustable roller assembly on most of their sliders, not the bottom-clip style common on older Milgard or Anlin doors. The stainless steel tandem roller ECO specifies is a good part, and we stock OEM-spec replacements plus a heavier 304 stainless equivalent when the original has failed early. In coastal neighborhoods like Playa del Rey or San Pedro, we strongly recommend the upgraded stainless option. Salt air eats the standard zinc housings in four to six years; we’ve pulled rollers out of Westchester sliders that crumbled in our hands after five years of marine layer exposure. For track replacement, ECO’s anodized aluminum track extrusions are specific to each series, and there’s no universal profile that matches cleanly. If your track is grooved or split, it’s an ECO part or a custom-milled match, not a big-box shelf item.
Signs Your ECO Window Systems Sliding & Patio Doors Is Failing
- The door needs a running start to move. This is almost always a roller failure. The nylon or stainless wheel seizes, the ball bearings inside grind flat, and you’re now dragging a 180-pound glass panel across aluminum track. Every forced slide cuts a little deeper into the track.
- The door lifts, then drops when you pull it. Classic worn-roller symptom. The adjustment screw has been maxed out over the years, the housing is bottoming out, and the panel is riding on the frame instead of the wheels. If you see a silver groove forming in the track, that’s the aluminum being machined by the door itself.
- The lock won’t engage, or engages only after lifting the panel. A sagging door means the hook bolt no longer lines up with the keeper in the jamb. You now have a lock that’s decorative, not functional, and a door that burglar can lift straight off its track with a pry bar.
- The handle is floppy or the inside thumb latch spins without catching. ECO slider handles use a die-cast internal mechanism. Once the return spring in the latch snaps, the handle goes limp and the only way to unlock from outside is increasingly creative. This part is inexpensive; the problem is that owners ignore it for months.
- The door sticks at one spot on the track, every time. That’s not a roller issue, that’s a bent or pitted track section, usually from someone rolling something heavy over it, or from a house shift. In Los Angeles, where we live on a fault line and half the hillside homes in Silverlake and Echo Park are on slow-creep soil, track deflection is common after a wet winter or a small quake.
Replacement Cost & What’s Included
In Los Angeles, ECO Window Systems sliding and patio door part replacement costs break down like this:
| Repair Scope | Typical Installed Price |
|---|---|
| Handle and latch assembly replacement (interior/exterior) | $180 – $260 |
| Roller replacement, both sides (stainless tandem rollers) | $240 – $380 |
| Roller plus track cap and minor track dressing | $320 – $470 |
| Full track replacement (milled ECO-compatible extrusion) | $450 – $520+ depending on door width |
| Full hardware overhaul: rollers, handle, lock, adjust and re-square | $420 – $680 |
What drives the range: door width, how far out of square the panel has settled, whether the track needs replacement or just cleaning and dressing, and whether you’re in a standard single-family home or a multi-story building with hoist access. Every quote is a written line-item price before we touch the door, and if the job takes longer than we estimated, you don’t pay more. That’s the way Spencer Odell and the Hale Windows Los Angeles crew have operated since day one: price first, work second, no surprises on the invoice.
DIY or Call Us?
The honest answer: a homeowner can safely inspect a sliding door. Pop the adjustment plug covers with a flathead, look at the wheel condition, run a putty knife down the track to clear debris and look for gouges. What we tell people not to do is lift the door off its track themselves. A typical ECO slider panel weighs 150 to 220 pounds depending on glass package, and lifting it out without two people and a padded drop cloth is how you blow out the glass, tear the weatherstripping, or crunch a finger between the panel and the jamb.
And here’s what Spencer Odell learned growing up in Silverlake, watching his father re-glaze single-pane windows in the craftsman bungalows off Hyperion Avenue: “Measure it right the first time, or you’ll be measuring it twice and paying for it either way.” Most DIY slider repairs go wrong at the measuring step. The wrong roller width means the panel sits cocked, the door binds, and now you’ve spent three weekends and two trips to a parts counter to still have a door that sticks. We stock the ECO-spec parts on the truck and can tell you in one phone call whether this is a $240 roller job or a $500 track replacement. Call (213) 269-5559.
FAQs
Rollers typically last 8 to 12 years in inland Los Angeles neighborhoods like Pasadena or the Valley, and 4 to 7 years in coastal areas where salt air attacks the zinc housings. Handles and locks tend to fail at the 10 to 15 year mark regardless of location. If your door is older than a decade and you’re near the ocean, plan on a roller replacement as preventive maintenance before the track gets scored.
A seized roller can sometimes be freed with solvent and re-lubrication, but we don’t recommend it. Once the internal ball bearings have worn flat, the wheel has play, and the door will sag again inside a year. A new stainless steel tandem roller set is $40 – $70 in parts, and the labor is the same whether we’re cleaning the old one or installing the new one. Call (213) 269-5559 if you want to know which camp your door is in.
Roller, handle, and lock replacements are done in one visit, typically 60 to 90 minutes for a single panel door. Full track replacement runs 2 to 3 hours including re-squaring the panel and re-weatherstripping the jamb. Most Los Angeles jobs are complete before lunch, and we don’t need you to move furniture or clear the room, just a clear path to the door.
We stock the common ECO Window Systems parts on our trucks: side-mount roller assemblies in both standard and heavy stainless, handle sets, lock bolts, keepers, and track caps. Rare series-specific parts, like a one-off screen door latch or a custom width track extrusion, may take 3 to 5 business days to source. We’ll tell you at the time of the estimate, in writing, what’s in stock and what’s not.
When your ECO Window Systems slider stops gliding, you want to know the part, the price, and the person coming to fix it. We’ll tell you all three on the phone before we even schedule the visit. Call (213) 269-5559 for a free estimate, or ask for Spencer Odell directly, he’s been fixing windows and doors across Los Angeles for over two decades and he still answers the phone like a neighbor, because that’s what this city runs on.
Written by Spencer Odell, Owner, Hale Windows Los Angeles at Hale Windows Los Angeles, serving Los Angeles and nearby areas.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.