New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Impact Garage Doors: The Los Angeles Owner’s Guide
If you own an ECO Window Systems impact garage door in Los Angeles and a panel is dented, a roller’s grinding, or the bottom seal has given up, we stock compatible replacement parts and install them same-day in most cases. Typical installed costs run $180 – $640 depending on the part: a broken roller or hinge cluster runs $180 – $320, a damaged panel replacement $450 – $1,200, and a full bottom seal replacement $140 – $260. Most Los Angeles homeowners discover the failure the same way: the door suddenly sounds like a freight train, or a hot afternoon makes the garage feel like a kiln because the seal is shot, or a coastal breeze starts whistling through a gap that was never there before.
Hale Windows Los Angeles is an independent service provider. We’re not affiliated with ECO Window Systems, but we work with their impact garage doors every week because Los Angeles building code and coastal wind zones make them a common sight from Palos Verdes to Marina del Rey.
Key takeaways:
- We stock ECO Window Systems-compatible rollers, hinges, seals, tracks, and struts on our trucks.
- Written price before any work starts. Every time.
- Most part swaps take 1 – 2 hours on site.
- Every repair carries a written guarantee. If it fails, the second visit is free.
- Call (213) 269-5559 for a free estimate over the phone.
Which ECO Window Systems Models This Applies To
ECO Window Systems manufactures impact garage doors in a few configurations that show up consistently across Los Angeles homes. The most common are their single-car and two-car impact-rated steel doors with Miami-Dade or Florida Building Code product approvals, sold through window and door dealers who specialize in hurricane-rated products. These doors typically use a 24-gauge or 26-gauge steel face bonded to a polyurethane or polystyrene core, with impact-rated glazing if the door has window panels.
Here’s the compatibility gotcha that trips up a lot of owners: ECO Window Systems doors use a specific roller stem diameter and hinge pitch that does not always match generic hardware-store parts. The roller stems on many ECO models are 7/16-inch, not the more common 11/32-inch found on big-box rollers. If you force a mismatched roller into the track, the door binds, the track flexes, and you’re replacing the track too. The best way to identify your exact model is the label on the door’s interior edge, usually near the bottom panel or on the end stile. It lists the model number, wind rating, and manufacture date. Take a photo of that label before you call us. It saves one whole diagnostic step.
For parts, we always start with OEM ECO Window Systems components when the door is still under structural warranty or when the homeowner wants an exact match. For out-of-warranty doors or common wear items like rollers and seals, quality aftermarket parts with the same stem diameter, hinge gauge, and wind rating are often the better value. We’ll quote both and let you decide. We carry the same professional lines across the board: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. We don’t push one brand when another fits the job better.
Signs Your ECO Window Systems Impact Garage Door Is Failing
- The door sounds like it’s dragging gravel when it opens. This usually means a roller bearing has seized or the roller wheel has flat-spotted. On ECO doors, the nylon-rimmed rollers wear down after 7 – 10 years in Los Angeles heat, and the metal wheel inside starts grinding against the track.
- You can see daylight under the closed door, or water pools in the garage after rain. The bottom seal, also called the astragal, has dried and cracked. Los Angeles summers bake rubber and vinyl seals. Once the T-shaped insert shrinks, water and leaves find their way in.
- The door hesitates, jerks, or goes up unevenly. One of the hinges has elongated or the hinge screws have pulled out of the stile. Impact-rated doors are heavy, often 250 – 350 pounds for a two-car door. A worn hinge on one side puts the entire panel under torque.
- There’s a visible dent or crease in a panel, especially after a storm or a vehicle bump. Impact doors are built to resist high wind and flying debris, but a direct car bumper hit will still crease the steel face. The structural integrity is compromised, and a creased panel can bind as the door cycles.
- The door shakes or rattles during operation, even at low speed. The struts or reinforcement brackets have loosened. Impact-rated doors rely on those horizontal struts for rigidity. Loose struts let the panels flex, which wears out hinges and rollers faster.
Replacement Cost & What’s Included
In Los Angeles, expect these installed price ranges for ECO Window Systems-compatible impact garage door parts. Every number below includes the part, labor, and our written repair guarantee.
| Part / Repair | Typical Installed Range |
|---|---|
| Roller replacement (full set of 10 – 12) | $180 – $320 |
| Hinge cluster replacement (top or bottom set) | $160 – $280 |
| Bottom seal / astragal replacement | $140 – $260 |
| Strut reinforcement or replacement | $220 – $400 |
| Single panel replacement (impact-rated) | $450 – $1,200 |
| Track inspection with minor adjustment | $90 – $180 |
What moves the price is pretty straightforward. Panel replacement costs swing based on the door width, the window configuration if the panel has glass, and whether the panel is a discontinued color that needs a field paint match. Rollers and hinges are tighter because the parts cost is consistent. We put the full price in writing before any tool comes off the truck. No change orders. No “we found more once we opened it up” surprises. That’s our no-hassle upfront pricing policy, and it applies to every job regardless of size.
DIY or Call Us?
There’s one part of this you can safely check yourself, and several parts you should not touch. You can visually inspect the rollers, hinges, and bottom seal without any danger. Look for flat spots on rollers, elongated hinge holes, and cracked rubber on the seal. That inspection helps you describe the problem accurately when you call us.
We draw the line at high-tension work. The torsion spring assembly on an impact-rated door, even on a door as well-built as an ECO Window Systems, stores an enormous amount of energy. A spring under tension can release suddenly and cause serious injury or worse. Same goes for cable replacement. If the spring or cables are broken, do not try to open the door, do not remove any bolts, and do not stand under the door. That is trained-professional territory, period. Spencer Odell, our owner, has measured and hung doors across the LA Basin for more than two decades, and even with that experience, spring work is handled with deliberate caution every time. Measure it right the first time, or you’ll be measuring it twice and paying for it either way.
For everything else, call (213) 269-5559 and we’ll walk you through what you’re seeing. If it turns out to be a ten-minute visual fix we can describe over the phone, we’ll tell you that, and there’s no charge. If it needs a truck, we’ll give you the written price before we schedule the visit.
FAQs
Rollers and bottom seals on ECO Window Systems doors typically last 7 – 12 years in Los Angeles. The city’s heat and coastal salt air from westside neighborhoods like Playa Vista and Venice shorten the life of rubber seals and nylon roller rims compared to inland areas. Hinges usually last 15 – 20 years if the door stays balanced, and the panels themselves can last 20+ years when the struts and hinges are maintained. Call (213) 269-5559 if your door is past the ten-year mark and starting to sound rough. We’ll give you an honest assessment over the phone.
Minor surface scratches can be touched up, but a dented or creased impact panel usually needs replacement. Impact-rated doors depend on the panel’s structural integrity to meet wind-load ratings. Once the steel face is creased, the panel loses stiffness, and repairing the cosmetic damage does not restore the engineering. We’ll tell you plainly if a touch-up is safe or if the panel needs to go. Call (213) 269-5559 and send us a photo of the panel. We’ll give you a written quote before we book the truck.
Most single-part replacements, like a roller set, hinge cluster, or bottom seal, take 1 – 2 hours on site. A full panel replacement can take 2 – 4 hours depending on the door width and whether the panel has impact-rated glazing. We carry common ECO Window Systems-compatible parts on our trucks, so in most cases we can complete the repair on the first visit. Call (213) 269-5559 with your door’s model label handy and we’ll confirm the timeline before you book.
We stock the common wear parts: rollers, hinges, bottom seals, struts, and track components sized for ECO Window Systems doors. For less common items like specific panel colors or custom window inserts, we order directly from our supplier network and handle the logistics for you. You never have to source a part yourself. Call (213) 269-5559 and we’ll check stock while you’re on the line. A live person answers every call, 24/7. No voicemail, no callback queue.
Written by Spencer Odell, Owner, Hale Windows Los Angeles at Hale Windows Los Angeles, serving Los Angeles and nearby areas.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.