New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Front Door Replacement in Los Angeles: What to Know First
CGI front door replacement in Los Angeles typically runs $2,400 to $6,800 installed, depending on the series, glass package, and whether the frame needs reworking. We complete most CGI front door replacements within two to three weeks of the initial measurement, and every job starts with a written price before any work begins. If you own a CGI front door that’s sagging, binding, or letting water in around the jamb, we’re the independent CGI service provider Los Angeles homeowners call for straight answers and a fixed price in writing. Call (213) 269-5559 and we’ll talk through what you’re seeing.
This page is for CGI owners specifically. Not every door company in Los Angeles knows the difference between a CGI Estate Collection door and a standard builder-grade unit, and that difference matters when it comes time to order parts, match hinge hardware, or preserve what’s left of your warranty. We do. We install and service CGI doors almost every week, and we’ve learned exactly where they fail and how to fix them without creating new problems.
How CGI Products Fail – and How We Fix Them
CGI makes a genuinely tough door. But Los Angeles sun, salt air, and hard use create failure patterns we see over and over. Here are the five most common, with what’s actually happening and how we address it.
- Sagging slabs on older Estate Collection doors. The Estate Series uses a heavier reinforced slab, and when the top hinge screws lose their bite in a weathered jamb, the door drops and starts dragging on the threshold. We pull the slab, pack the hinge mortises with hardwood or install longer screws into the stud, and re-square the reveal so the door swings freely. This is not a job for shims and hope.
- Water wicking at the bottom rail on doors facing the coast. From Venice to San Pedro, we regularly see bottom rail rot or delamination on CGI doors that were never re-sealed after the original sweep wore down. The fix is replacing the sweep, re-sealing the rail end grain, and checking the threshold for proper slope. If the rail is too far gone, we replace the slab rather than band-aiding it.
- Broken or seized hinge bearings on high-traffic doors. CGI hinges are commercial-grade, but ten years of daily cycling without lubrication kills the bearings. You’ll hear a click or groan when the door moves. We replace the hinge set with OEM-spec CGI hardware or a quality aftermarket equivalent that matches the original finish, then align all three hinges so the load is distributed evenly.
- Glass package seal failure, especially on west-facing doors. The impact-rated glass in CGI doors is excellent, but Los Angeles afternoon heat on unprotected west exposures eventually breaks down the seal on insulated units. You’ll see fogging or moisture between the panes. We can replace just the glass insert on most CGI door models, which is far cheaper than replacing the whole slab, and we’ll match the low-E coating to what’s already there.
- Frame-to-wall water intrusion where the original install used no sill pan. We pull open more CGI doors in Los Angeles and find no sill pan flashing underneath. The original installer relied on caulk, and caulk fails in our dry-wet-dry climate cycle. We pull the frame, install a proper sloped sill pan, re-set the frame plumb and square, and re-flash the exterior. This is the difference between a door that lasts ten more years and one that rots the subfloor.
Our CGI Front Door Replacement Process
Here’s how a CGI front door replacement goes when you call us. It’s the same process Spencer Odell has used since he started measuring doors across the LA Basin, and it exists so there are no surprises on the invoice.
- 1
Call and describe the door. Tell us the age, the style, and what it’s doing. If you can find the model name on a sticker on the hinge edge of the slab, great. If not, we’ll identify it on site.
- 2
We measure and diagnose. A technician visits with the right tools, confirms the series, checks the frame, slab, hinges, weatherstripping, and threshold. We write down exact rough-opening numbers, which is more than most installers bother with.
- 3
You get a written price. Before any work starts, you get a line-item quote covering the slab, hardware, installation, and disposal. That number does not change unless we find hidden rot and you approve the additional work in writing first.
- 4
Parts decision, made with you. If the door needs replacement, we review OEM CGI parts versus quality aftermarket options and give you a clear recommendation based on age, warranty status, and budget. If it’s a repair, we use the right component for the job, not whatever is on the truck.
- 5
Installation and testing. We set the door, shim it precisely, insulate and seal, install hardware, and then cycle the door a dozen times to confirm the swing, latch, and seal. The site is swept and cleared before we leave.
- 6
Written guarantee. Every repair and replacement carries our written guarantee. If a repair fails, the second visit is free. And the whole job sits under our 365-Day Done Right Promise: if it isn’t right, we make it right, no argument.
What CGI Front Door Replacement Costs in Los Angeles
Here’s what we see across Los Angeles, from the San Fernando Valley to the Westside, on CGI front door work. These are installed prices, including the door, hardware, installation, haul-away, and our written guarantee.
| CGI Door Scenario | Typical Installed Price Range |
|---|---|
| Front door repair (hinge, sweep, weatherstripping, latch adjustment) | $180 – $450 |
| Glass insert replacement on existing CGI slab | $500 – $1,200 |
| Full slab replacement, standard CGI door, no frame work | $2,400 – $3,800 |
| Full frame-and-slab replacement with new sill pan and flashing | $4,200 – $6,800 |
| Custom-size CGI door or Estate Collection upgrade | $5,500 – $8,500+ |
What moves the price: custom sizing, upgraded glass packages, frame rot that requires structural repair, and whether we’re matching existing hardware finishes. Stucco and exterior stucco patch work around a new frame adds labor too. All of it is in the written quote before we start. Call (213) 269-5559 for an exact number on your door. The estimate is free.
Why Los Angeles Homeowners Call Hale Windows Los Angeles for CGI Work
We’re the company that tells you who’s coming to your door before the truck pulls up. Every technician is background-checked, identity-verified, photo-badged, and pre-announced by name and photo. For homeowners who are often home alone, parents with young kids, and older Angelenos, that matters. You’ll know exactly who’s walking up your front path.
Our written-price policy is absolute. You get the number before any work starts, and it doesn’t change unless you approve a written change order. The 365-Day Done Right Promise backs every CGI door we touch. And because we install and service eight professional product lines, including PGT, CWS, ES Windows, and ECO Window Systems, we’ll never try to force a different brand on you just because it’s easier for us. Spencer Odell founded this company on a simple rule: measure it right the first time, or you’ll be measuring it twice and paying for it either way. We measure it right.
FAQs
As an independent CGI service provider, we’re not authorized by CGI, so we can’t speak to what CGI’s warranty department will or won’t cover. What we can tell you is that our work carries its own written guarantee, and we install replacement doors using OEM-spec parts or quality aftermarket components that match the original. If preserving a manufacturer warranty matters to you, tell us when you call and we’ll walk through your options before ordering anything.
Both. For hinges, sweeps, and weatherstripping, OEM CGI parts are usually the right call and we can source them. For things like glass inserts, a quality aftermarket unit with a matching low-E coating often makes more financial sense than an OEM piece, especially on doors older than ten years. We’ll show you the price difference and recommend the right route for your door. Call (213) 269-5559 and we’ll check availability for your specific series.
Most CGI doors we see in Los Angeles can be repaired rather than replaced, especially if the frame is sound and the slab hasn’t rotted. Hinge work, sweep replacement, latch realignment, and glass insert swaps are all common repairs we do the same week. If the slab is delaminating or the bottom rail is soft, replacement is the honest recommendation. Either way, you’ll get a written price before you commit.
Once we’ve measured and ordered the door, a typical CGI front door replacement takes one full day on site. Custom-sized slabs or full frame replacements with stucco work can run two days. We’ll set the schedule in writing when we give you the quote, and we don’t leave the job open-ended.
Call us. If a repair fails, the second visit is free. And if anything about the replacement isn’t right within 365 days, our Done Right Promise applies: we make it right, no argument needed. That’s the whole point of the guarantee.
Written by Spencer Odell, Owner, Hale Windows Los Angeles at Hale Windows Los Angeles, serving Los Angeles and nearby areas.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.