New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Front Door Replacement Across Hancock Park
Front door replacement in Hancock Park typically runs $3,200 to $8,500 for a custom wood door that meets HPOZ requirements, or $2,800 to $6,000 for an impact-rated fiberglass unit on homes outside the historic overlay. Most Hancock Park jobs take 4 to 8 weeks from permit submission to final inspection, with the HPOZ review adding 2 to 6 weeks when it applies. We know Hancock Park because we work here weekly: the 1920s Spanish Colonials off Rossmore, the Tudor estates east of Highland, the Mediterranean Revival mansions along June Street. If you need a front door that the city will actually approve, call (213) 269-5559 for a free written estimate.
Why Hale Windows Los Angeles Is Hancock Park’s Preferred Front Door Replacement Company
Hancock Park homeowners call us because the neighborhood is not like the rest of Los Angeles. The Historic Preservation Overlay Zone changes everything about how a front door replacement gets done, and we have spent years learning exactly what the HPOZ board will and will not sign off on. Spencer Odell, who leads our team, has walked dozens of Hancock Park jobs where a general contractor got the door wrong on the first try and the homeowner had to start over.
We show up with the price in writing before anyone touches your entry. No change orders snuck in, no “we found rot so it doubled” conversations. If we find rot, we priced the allowance for it before we started. And every Hancock Park job carries the 365-Day Done Right Promise: if the door is not right a year later, we make it right. That is the whole guarantee, written on your contract.
You will also know exactly who is coming. Every Hale technician is background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo before the visit. Spencer sends the photo himself. Many of our Hancock Park customers are home alone during the day, and they tell us that one step is why they called us instead of the next bid.
Front Door Installation in Hancock Park
Front Door Installation in Hancock Park rarely means pulling a stock door off a shelf. Most of what we install here is custom: solid mahogany, white oak, or vertical-grain fir, built to the exact stile and rail dimensions of a 1920s original, with the hardware the HPOZ board expects. A typical custom wood front door installation in Hancock Park runs $4,500 to $8,500, including the slab, jamb work, hardware, finish, and HPOZ documentation. Entry doors on 1940s and 1950s ranches south of Wilshire, outside the overlay, usually fall in the $2,800 to $4,200 range for a quality impact-rated fiberglass or wood unit.
If your home is a designated Historic-Cultural Monument, you already know the drill. But if you recently bought one of these houses and this is the first door replacement, here is what happens: we photograph the existing door from every angle, document the hardware, match the wood species and profile, and prepare the HPOZ submittal package before we order anything. You see the written price for all of that before we begin.
Custom Wood Doors for HPOZ Homes
We build doors that match what Hancock Park was built with. That means true divided-lite glazing, mortise-and-tenon joinery, and the same reveal lines as the original. We have sourced period-correct brass and iron hardware from local foundries for enough Rossmore and June Street jobs that we can usually tell you whether your original knobs and hinges are salvageable or need exact replication.
Impact-Rated Entry Doors
For Hancock Park homes outside the historic overlay, impact-rated fiberglass and steel entry doors give you something old wood cannot: a laminated glass interlayer and reinforced frame that meets hurricane-coast pressure ratings. These doors also handle the dry heat better than solid wood, which expands and contracts enough in Hancock Park summers to cause sticking if the slab was not properly sealed.
Entry Door Installation in Hancock Park
Entry Door Installation in Hancock Park often starts with a door that is no longer doing its job physically. Original 1920s solid-wood doors swell in the humid winter weeks and shrink in the hot, dry summer months. After ninety years of that cycle, you get a door that sticks in June, gaps in January, and has a 1/2-inch sightline at the jamb no matter what you do to the hinges. A new entry door, properly installed into the out-of-square masonry opening these old houses all have, solves all three problems at once. Entry door installation in Hancock Park typically runs $3,000 to $6,500 for a wood door and $2,400 to $4,800 for fiberglass, installed.
Shimming and Sealing Older Openings
Hancock Park door openings are rarely square. We shim every jamb to the opening, not the other way around, then seal the rough gap with backer rod and a flexible sealant so the dry heat does not pull the frame apart over time. Skipping this step is the most common reason a new Hancock Park door starts sticking within two years.
Hardware and Finish Matching
We replicate original strap hinges, rim locks, and escutcheon patterns for pre-WWII homes, and we carry a working stock of common 1920s and 1930s patterns. If your hardware is pitted but structurally sound, we can often restore and reuse it, which the HPOZ board prefers over new reproduction pieces.
Trusted Brands We Service in Hancock Park
We install and service front doors from eight professional-grade lines, but on Hancock Park jobs we lean on three specifically: Therma-Tru for impact-rated fiberglass entry systems, and CWS and CGI for custom and impact doors when a homeowner wants the strongest glazing package available. We also work with ES Windows when an entry side-lite or transom needs matching glass. Because we stock common components locally for Hancock Park customers, a hardware or weatherstripping part does not mean a two-week wait. Call (213) 269-5559 and we will tell you what we have on hand for your door.
Common Front Door Replacement Problems We See in Hancock Park Homes
- HPOZ rejection after the fact. We see homeowners who bought a fiberglass or steel door, had it installed, then got a correction notice from the city because the overlay requires the original material and design. That is a $6,000 mistake on average, and it is fully avoidable with a submittal done right the first time.
- Rot hiding behind the jamb. Original Hancock Park door frames sit directly on masonry with no waterproofing barrier. Ninety years of irrigation overspray and occasional roof-gutter overflow means the bottom 12 inches of framing is often gone. We price an allowance for this before we start, so you are not surprised when the old door comes out.
- Sticking and binding from the dry heat. Solid wood doors in Hancock Park move constantly. If the slab was not properly sealed on all six faces, or the hinges were not set to account for seasonal expansion, the door binds in late summer. We pre-hang every custom door with that movement already dialed in.
- Out-of-square masonry openings. These old openings have shifted. A pre-hung door dropped into an out-of-square hole without shims develops gaps at the top and bottom corners within a season. We cut and shim to the actual opening dimensions, not the nominal size.
Pricing for Front Door Replacement in Hancock Park, CA
Here are honest ranges for Hancock Park front door work in 2026. A custom solid-wood door matching 1920s specs, with HPOZ submittal: $4,500 to $8,500. A quality impact-rated fiberglass door with new jamb and hardware, outside the overlay: $2,800 to $4,800. Full tear-out with reframing of a rotted opening, including waterproofing and permit: add $1,800 to $3,500 depending on what we find. Period-correct hardware replication, if yours cannot be restored: $600 to $2,400 per door. Factor in the HPOZ review timeline of 2 to 6 weeks, which can push a full project to 8 weeks. Call (213) 269-5559 for a written quote on your exact door. Estimates are free, and the number you see is the number you pay.
We Also Serve Cities Near Hancock Park
While this page is focused on Hancock Park, our Front Door Replacement team also works in Los Angeles, Gardena, Studio City, and South Gate. We apply the same written-price policy and 365-Day Done Right Promise on every job, whether it is a historic mansion on June Street or a 1950s ranch in Gardena. Learn more about our work across the area on our Front Door Replacement in Hancock Park page.
Serving Hancock Park, CA - Our Local Coverage Area
We’re based in the Hancock Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Front Door Replacement in Hancock Park
Yes. If your home is within the Hancock Park HPOZ, you need both a standard building permit from LADBS and approval from the HPOZ board, which reviews the door for compatible design, materials, and hardware before the permit is issued. We prepare the full submittal package for you, including photographs, material specifications, and hardware documentation, so you do not deal with the board directly. Call (213) 269-5559 and we can tell you in five minutes whether your address falls inside the overlay.
If your Tudor is inside the HPOZ, the replacement door must match the original in material and design, which almost always means wood. Fiberglass is generally rejected for pre-WWII historic homes. If your home is outside the overlay, impact-rated fiberglass is a strong choice for Hancock Park’s hot summers and gives you laminated glass and a reinforced frame that solid wood cannot match. We will check your HPOZ status before quoting anything.
We price a written allowance for hidden damage into every Hancock Park contract before we start. If we pull the old door and find rotted studs or failed waterproofing, we show you photos, give you the exact cost to fix it, and get your written sign-off before touching it. You are never hit with a surprise invoice after demolition.
In most Hancock Park cases, replacing a door in-kind does not trigger a requirement to widen the opening or rebuild the landing. However, if the door is in a non-conforming location or the landing height does not meet current code for the replacement door’s swing, the inspector may require corrections. We identify these code issues during the pre-bid visit so you know before the permit is filed. Call (213) 269-5559 for a free code assessment of your entry.
Yes. We can restore original brass and iron hardware when the pieces are structurally sound, and when they are not, we have them replicated from patterns we source from local foundries that specialise in 1920s HPOZ-compliant work. The HPOZ board prefers exact replication over modern substitutes, and we document every pattern so the submittal package passes review the first time. Bring us a photo of your hardware and we will tell you which path applies.
Written by Spencer Odell, Owner at Hale Windows Los Angeles.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.