New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Horizontal Roller Windows in Los Angeles, CA
Horizontal roller windows glide open side to side on tracks instead of swinging out on hinges or cranking upward. Here in Los Angeles, we install and service them constantly, from Mid-Wilshire bungalows to Sherman Oaks mid-century homes, because they match the city’s architectural DNA and give homeowners full ventilation without a sash jutting into a walkway or patio. If you’re evaluating horizontal roller windows for your home, call Hale Windows Los Angeles at (213) 269-5559 and we’ll walk you through what makes sense for your specific openings. You can also see how this fits into the broader scope of our Window Installation work.
We’ve been doing this since 2009, and one thing we’ve learned: the product matters less than the fit. A cheap roller window on the wrong track is a constant annoyance. A well-chosen PGT or CGI roller window on a properly shimmed and sealed track is something you never think about, which is the whole point. Our job is to get you to that second outcome, with a written price in your hands before any work begins and the 365-Day Done Right Promise behind every installation.
Key Takeaways
- Cost range in LA: Most horizontal roller window replacements run $450 to $1,400 per window installed, depending on size, frame material, glass package, and track hardware.
- Best rooms for roller windows: Kitchens over sinks, bedrooms facing courtyards, and any opening onto a walkway or patio where a swinging or cranking sash would be in the way.
- Brands we install: PGT, CGI, CWS, and ViewLux are the lines we most often spec for LA roller window jobs.
- What you get from Hale: A written price before work starts, a background-checked and photo-badged technician announced by name before arrival, and a 365-Day Done Right Promise on every job.
- Fastest way to an answer: Call (213) 269-5559. A live person picks up, 24/7.
When You Need Horizontal Roller Windows
Some homes were built with roller windows from day one. Others have them retrofitted. Either way, here are the situations where we most often get called to Los Angeles homes:
- Your existing rollers are fighting you. You have to lift, wiggle, or slam the sash to get it moving. The rollers underneath are worn flat or the track is bent, and in coastal areas like Playa del Rey, salt air accelerates that wear noticeably faster than inland.
- The window over your kitchen sink needs replacement. This is probably the single most common roller window in Los Angeles. It sits above a counter, so a crank-out or double-hung simply doesn’t work. A horizontal slider opens with one hand and stays put.
- You’re replacing original aluminum windows from a 1950s or 1960s build. Much of the San Fernando Valley and West LA housing stock from that era used horizontal aluminum sliders. They’re single-pane, drafty, and often the frame itself has corroded. Modern vinyl or aluminum roller windows with low-E glass (a thin coating that blocks heat while letting light through) are a direct upgrade.
- A bedroom or hallway faces a walkway or patio. Any opening where a swung or cranked sash would block foot traffic, hit a fence, or crowd a balcony is a candidate for a slider. We see this constantly in duplexes and courtyard apartment buildings from Echo Park to West Adams.
- You want an egress-friendly opening that’s easy to operate. Roller windows that meet egress sizing give you a code-compliant escape route with less hardware to manipulate than a casement, which matters for older homeowners and families with young children.
- Security is a real concern. In some Los Angeles neighborhoods, window locks are doing a lot of the heavy lifting. Roller windows can be spec’d with multi-point locks, laminated glass (which holds together when struck), and reinforced track stops that make a pry-bar entry dramatically harder. PGT and CGI both make heavy-duty roller window lines engineered for exactly this.
Our Horizontal Roller Windows Process
Here’s exactly how a roller window job goes with us, from first call to final walkthrough:
- You call (213) 269-5559 and a live person answers. No voicemail tree, no callback queue, no “press 2 for new installations.” You describe what’s going on with your windows, and we book a time that works for you. If it’s an emergency like a shattered pane or a window that won’t close and lock, we treat it as a priority.
- You know who’s coming before the truck pulls up. This is our Threshold Standard, and it’s non-negotiable. Every technician is background-checked, identity-verified, uniformed, and photo-badged. Before the visit, we send you the technician’s name and photo. You open the door knowing exactly who’s on the other side. No surprises, no strangers.
- We measure, inspect, and talk options on site. Your technician examines the existing openings, checks for things like water intrusion around the frames, measures for square, and talks through what’s actually needed. We may recommend vinyl over aluminum, a specific glass package for south-facing walls, or a heavier PGT or CGI window if security is a priority.
- You get a written price before any work starts. Not a ballpark, not a “we’ll see how it goes.” A written number. Every time, on every job. If the number changes during the work for a legitimate reason, we will not touch the project until we’ve talked to you about it and you’ve approved the change in writing.
- Installation day. We remove the old window, inspect the rough opening for rot or damage, flash and seal with materials suited to Los Angeles heat and rain patterns, set the new window level and square, and install the track and sashes. We clean up after ourselves and haul away the old window. Installation for most roller window replacements takes half a day to a full day depending on how many openings are being replaced.
- Final walkthrough and the 365-Day Done Right Promise. We walk you through operation, lock function, and care, and we leave you with the written guarantee. If anything about the installation is not right within 365 days, we make it right. No argument needed. That promise is stamped on every job we do.
Horizontal Roller Windows Pricing in Los Angeles
Horizontal roller window replacement in Los Angeles typically costs between $450 and $1,400 per window installed, with most jobs landing in the $600 to $900 range per opening. That’s a realistic span for the LA market in 2025 and 2026. What you pay depends on five things:
- Window size. A 36″ x 36″ kitchen slider costs noticeably less than a 72″ x 60″ living room slider. More glass, more frame, more labor.
- Frame material. Vinyl is the value option, aluminum is the slim-profile choice, and both are common in Los Angeles. Aluminum typically runs 15% to 25% more than comparable vinyl.
- Glass package. Single-pane is cheapest and rarely recommended. Dual-pane with low-E coating adds $150 to $300 per window but pays for itself in HVAC savings, especially on south-facing and west-facing walls in the Valley.
- Security or impact options. Laminated glass, reinforced frames, and multi-point locks add cost. PGT and CGI impact-rated roller windows can push a large opening to $1,800 or more, but for homeowners in brush-adjacent or high-traffic areas, the tradeoff is often worth it.
- Installation conditions. Rotted framing, stucco repair, oversized openings that need infill, or second-story access all add labor. We’ll catch these during the on-site inspection and price them in the written estimate, not spring them on you later.
| Window Type | Typical LA Price Range (Installed) |
|---|---|
| Small vinyl roller (up to 36″ x 36″) | $450 – $700 per window |
| Medium vinyl roller (up to 60″ x 48″) | $600 – $950 per window |
| Large vinyl or aluminum roller (up to 72″ x 60″) | $850 – $1,400 per window |
| Impact-rated PGT or CGI roller | $1,100 – $1,800+ per window |
| Track or roller hardware repair (no window replacement) | $125 – $325 per window |
These numbers reflect what we see across Los Angeles neighborhoods from Westchester to Highland Park. Your exact quote will depend on your specific openings, and that’s why we give you a written price before any work starts. Call (213) 269-5559 and we’ll send someone out to measure and quote for free.
What We Look For When We Inspect Roller Windows
Before we quote anything, we check the thing everyone else skips. Here’s what matters on a roller window and what goes wrong when it’s ignored:
Track integrity and drainage
The track is the foundation of a roller window. If it’s bent, clogged, or rusted, the window will never roll properly, no matter how good the new sash is. In Los Angeles, we also check drainage. Roller tracks need weep holes that let rainwater escape. If they’re clogged or missing, you’ll see water staining on the interior sill, and eventually rot in the framing below. Homes near the coast like Venice or San Pedro have it worse because wind-driven rain pushes water into the track more aggressively.
Roller hardware condition
The wheels under the sash are the workhorses. Worn rollers cause the sash to drag, scrape, or stick. We see this constantly in older aluminum sliders, where the original nylon rollers have disintegrated after 30 or 40 years of LA dust and smog grit. Replacing rollers and adjusting the sash is a $150 to $325 repair that often buys an older window another decade of life, and we’ll recommend that path honestly if the frame and glass are still sound.
Seal performance and glass condition
Fogging between panes means the insulated glass unit has failed and the seal is gone. No repair fixes a blown seal; the glass unit gets replaced. In a roller window, that’s sometimes less expensive than you’d think, especially for standard sizes. If the frame is good and the track is good, we can often replace just the glass unit for a few hundred dollars.
Lock function and security
This is the one we take seriously, because a roller window that doesn’t lock is an open invitation. We check every lock point on every window we inspect. When security is a priority for a homeowner, we spec PGT or CGI roller windows, which are designed and tested to resist forced entry. For parents with young children or homeowners who live alone, that’s not an upsell. It’s the right product for the right opening.
Why Los Angeles Homes Suit Roller Windows
Horizontal roller windows are not a compromise. In many Los Angeles homes, they’re the best option, period. Here’s why:
- Space efficiency. A slider doesn’t swing into a room, a walkway, or a patio. In the tight side yards of older Los Angeles neighborhoods, that’s a meaningful difference.
- Ventilation control. You can crack a slider open two inches or open it wide. There’s no gust catching a swinging sash and slamming it shut.
- Climate fit. Los Angeles rarely needs a window that swings into the wind to catch a breeze. Sliders let air move straight through, which is exactly what cross-ventilation in a warm, dry climate calls for.
- Architectural authenticity. Mid-century modern homes in Los Angeles were built with horizontal lines. Slider windows honor that geometry. We’ve done replacements in the hills above Studio City and Silver Lake where a casement or double-hung would have looked out of place.
- Seismic sense. Lighter, simpler operating hardware means fewer things that can bind or fail when the ground moves. It’s a small point, but in Los Angeles, it’s a real one.
How Much Does Horizontal Roller Window Replacement Cost in Los Angeles?
Horizontal roller window replacement in Los Angeles typically costs between $450 and $1,400 per window installed, with pricing driven primarily by the window’s size, frame material, and glass package. Security-rated options from PGT or CGI push the top end higher, and small vinyl sliders stay at the low end. If you want a specific number for your openings, the fastest path is a free on-site quote. We write the price down before we do anything, so you’ll know exactly where you stand. Call (213) 269-5559 to schedule.
Can You Fix a Horizontal Roller Window Same Day in Los Angeles?
Yes, in most cases we can repair a sticking, dragging, or off-track horizontal roller window the same day we visit, especially if the problem is worn rollers, a bent track, or a failed lock. Glass replacement takes a little longer because the unit has to be ordered to size, but we’ll get you a timeline on the first visit. If you’re in Los Angeles and a window won’t close or lock, treat it as urgent. Call (213) 269-5559 and we’ll prioritize getting a technician to you.
FAQs – Horizontal Roller Windows
How much does horizontal roller window replacement cost in Los Angeles?
Horizontal roller window replacement in Los Angeles typically costs between $450 and $1,400 per window installed, with most homeowners paying $600 to $900 per opening. Size, frame material, glass package, and any security upgrades drive the price up or down. We give every customer a written price before any work starts, so the number you’re quoted is the number you pay. Call (213) 269-5559 for a free estimate on your specific windows.
Is it cheaper to repair or replace a horizontal roller window?
If the frame is sound and the glass is intact, repair is almost always cheaper. Replacing worn rollers or a bent track runs $125 to $325 per window, versus $450 to $1,400 for a full replacement. The crossover point is when the frame is corroded, the glass seal has failed, or the window is old enough that you’d be repairing it again in a year or two. We’ll tell you honestly which path makes more financial sense for your specific window. Call (213) 269-5559 and we’ll take a look and give you both numbers in writing.
Can a horizontal roller window be made more secure?
Yes. A horizontal roller window can be secured with reinforced frames, laminated glass that resists shattering, multi-point locks, and track stops that prevent the sash from being lifted out of the track. PGT and CGI build roller windows specifically engineered for forced-entry resistance, and we install both lines in Los Angeles. For homeowners who live alone, work late hours, or have young children at home, security-rated roller windows are often the right call. Call (213) 269-5559 to talk through options with a technician.
Do horizontal roller windows leak more than other window types?
A properly installed horizontal roller window does not leak more than any other window type. Leaks on sliders are almost always caused by clogged or missing weep holes in the track, failed caulking around the frame, or a window that was never flashed correctly during installation. We inspect all three on every visit, and every installation gets sealed and flashed to Los Angeles weather conditions. Call (213) 269-5559 if you’re seeing water stains around a slider and we’ll find the source.
How long does it take to install horizontal roller windows?
Most horizontal roller window replacements take half a day to a full day, depending on how many windows are being installed and whether we run into framing issues once the old window comes out. We’ll give you a time window before installation day, and your technician will be pre-announced by name and photo through our Threshold Standard. Call (213) 269-5559 and we’ll get you on the schedule.
Contact Hale Windows Los Angeles for Horizontal Roller Windows
If you’re considering horizontal roller windows for your Los Angeles home, we’d like to earn the job. Call us at (213) 269-5559 and you’ll talk to a live person, any hour of any day. We’ll schedule a free on-site estimate, put a written price in your hands before any work starts, and back the installation with our 365-Day Done Right Promise. You’ll know exactly who’s coming to your door before we arrive. That’s how we’ve done it since 2009, and it’s how every job goes, from a single kitchen slider to a full-home replacement.
Written by Spencer Odell, Owner at Hale Windows Los Angeles, serving Los Angeles.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.