New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Trusted Window Replacement for Los Angeles Homeowners
Our Window Replacement cost guide shows that projects in Los Angeles typically run between $650 and $1,400 per window installed, with most whole-home projects in neighborhoods like Palms, Venice, and South Gate landing between $9,000 and $22,000 depending on the product line and the condition of the existing frames. The job usually takes one to three days once materials arrive, and in Los Angeles, the decision is rarely just about looks. It’s about heat, noise, energy bills, and whether the window actually keeps the outside out.
Hale Windows Los Angeles has handled window replacement across Los Angeles since 2009, and we’ve seen what coastal salt air does to aluminum frames in Venice, what the inland heat does to seals in Huntington Park, and how fast a house in Westmont loses cool air through a window that looks fine from the curb. Every project starts with a written price before any tool comes off the truck, and every job carries our 365-Day Done Right Promise. If it’s not right, we make it right. No argument needed. Call (213) 269-5559 to schedule your free estimate.
Energy Efficient Windows
Energy Efficient Windows are replacement windows engineered to slow heat transfer between your home and the Los Angeles climate, typically using low-E glass (a thin coating that blocks heat while letting light through), double or triple panes, and insulated frames that hold their shape over years of thermal expansion. In Los Angeles, where summer afternoons regularly push past 90 degrees in Culver City and Lawndale, the right glass package can cut the solar heat coming through a west-facing window by half or more, which is why we fit every project to the orientation of the individual opening rather than selling one glass package to every house.
Low-E Coatings and Solar Heat Gain
The low-E coating matters more than the frame material in our climate. A window with a low solar heat gain coefficient, the rating that measures how much radiant heat passes through the glass, can turn a brutal west-facing bedroom in West Carson into a room you actually use after 4 p.m. We’ll show you the ratings on every product we quote so you know exactly what you’re paying for.
Frame Materials That Hold a Seal
Vinyl and fiberglass frames have become the default in Los Angeles for good reason. They don’t corrode the way older aluminum frames do within a mile of the coast, and they don’t flex the way wood does through a year of wet winters and dry summers. We install both, and we’ll tell you honestly which one fits your house and budget.
Window Replacement Company
Window Replacement Company is the kind of firm you need when the job involves load-bearing wall openings, stucco siding that has to be cut back cleanly, and a permit pulled with the Los Angeles Department of Building and Safety. A good Los Angeles Window Replacement company handles the measuring, the ordering, the installation, the stucco patch, and the final inspection, and gives you one phone number to call if anything goes wrong afterward. Hale Windows Los Angeles has been that company since 2009, and we’re independently owned and operated, part of the Threshold Group family of home-service brands.
Why We Put the Price in Writing First
You’ll have a written price in your hands before any work starts, every time, on every job. That number includes the windows, the labor, the stucco work, and the haul-away of the old units. If something changes during the install, you’ll know about it in writing before we do it, not after.
The Threshold Standard on Every Visit
Every technician who comes to your Los Angeles home is background-checked, identity-verified, uniformed, photo-badged, and pre-announced by name and photo before the visit. That’s our Threshold Standard, and it means you know exactly who is at the door before you open it. You’ll get the technician’s name and photo by text before the truck arrives.
Window Glass Replacement
Window Glass Replacement is the process of removing a broken, fogged, or failed pane and installing new glass in the existing frame, and it’s the right fix when the frame itself is still square, operable, and in good condition. In Los Angeles, window glass replacement typically runs $180 to $520 per pane depending on size, glass type, and whether the sash has to come out to do the work safely. We do this every week in homes across Gardena and Studio City, and we carry double-pane insulated glass units in the sizes and thicknesses that most Southern California houses actually use.
When the Glass Is Worth Saving vs. Replacing
If your frame is vinyl or fiberglass and it’s less than 20 years old, replacing just the glass is usually the smart money. If the frame is corroded aluminum or a wood sash with soft spots, a new glass pack won’t fix the real problem. We’ll inspect the frame before we quote, and we’ll tell you straight which path costs less over the next ten years.
Dual-Pane vs. Single-Pane Glass
Most houses built in Los Angeles before 1980 still have single-pane glass, and replacing it with a dual-pane insulated unit is the single biggest comfort upgrade you can make for under $500 per opening. The second pane creates an insulating air space that cuts heat gain in summer and holds heat in winter, and it drops noise from a busy street in Palms or Lawndale by a noticeable margin.
Window Sash Replacement
Window Sash Replacement is the repair or replacement of the moving panel that holds the glass inside a window frame, the part that slides up, swings out, or tilts in when you open the window. In Los Angeles, sash replacement runs $300 to $700 per window when the existing frame is sound enough to keep, which is often the case with vinyl and fiberglass units that are only 15 to 20 years old. If the sash is cracked, warped, or the balance mechanism has failed so the window won’t stay open, replacing the sash beats tearing out the whole window.
Sash Balance Failures in Older Homes
In older Los Angeles houses, especially the 1950s and 60s ranch styles across Culver City and Westmont, the original sash balances have usually given out. The window feels heavy, slams shut, or won’t stay up. We replace the balances and the sash together when the frame measurements check out, and the window works like new without disturbing the stucco.
When a Sash Replacement Isn’t Enough
If water has been getting behind the frame for years, the wood or drywall around the opening may have rot that a sash won’t fix. That’s a full window replacement job, and we’ll show you the damage with photos before we quote it. No one should pay for a sash and then discover six months later the opening needed a full tear-out.
Window Glass Repair
Window Glass Repair is the process of addressing cracked, scratched, or otherwise damaged glass in a window, often on a smaller scale than full glass replacement, and it’s a service we offer across Los Angeles when the damage is contained to one pane or one edge. Small cracks and chips can sometimes be stabilized, but in most cases the safest and most honest fix is a new piece of glass installed in the same frame. In Los Angeles, window glass repair on a standard double-hung or slider runs $160 to $450 depending on the size and whether the pane is tempered.
Tempered Glass Requirements in Los Angeles
Any window glass within 24 inches of a door, in a stairwell, or in a bathroom has to be tempered safety glass under California building code, and if your cracked pane is one of those, the replacement has to be tempered too. It shatters into small dull chunks instead of sharp shards, which is exactly why the code requires it. We pull permits and pass inspections on every job where one is required.
When a Crack Means the Seal Is Already Gone
A crack that starts at the edge of an insulated glass unit usually means the seal has already failed, and moisture is working its way into the air space. Repairing just the crack won’t stop the fog. We replace the whole glass unit, which restores the insulating value and the clear view in one visit.
Window Pane Replacement
Window Pane Replacement is the replacement of a single pane of glass within a window, and for Los Angeles homeowners it’s the standard fix for a cracked pane, a fogged dual-pane unit, or a pane that no longer seals. Single pane replacement runs $150 to $350 in most Los Angeles homes, while a dual-pane insulated unit runs $250 to $550, especially when it’s a custom size from the original build. We handle both, and we carry glass in standard Los Angeles home sizes so the work often happens in one visit.
Single-Pane vs. Dual-Pane Replacement
If your windows still have single panes, you have a decision to make. You can replace the one pane cheaply, or you can upgrade that opening to a dual-pane insulated unit and start cutting your cooling costs in that room immediately. We’ll quote both numbers in writing so you can decide with real dollar figures, not a sales pitch.
Getting the Measurements Right the First Time
Glass has to be measured to the sixteenth of an inch, which is why we measure every opening ourselves rather than working from a homeowner’s tape reading. A pane that’s off by an eighth of an inch won’t seat properly in the glazing channel, and that’s how you end up with a window that rattles in the wind. We’ve seen it happen with handyman installs, and fixing it costs more than doing it right the first time.
Window Seal Repair
Window Seal Repair is the restoration or replacement of the seal that holds the insulating gas between two panes of glass, and it’s one of the most common window issues we see in Los Angeles homes. When the seal fails, moisture gets between the panes, the window fogs, and the insulating value drops to nearly zero. Window seal repair in Los Angeles, which almost always means replacing the insulated glass unit, runs $220 to $500 per window depending on the dimensions and whether the sash is accessible without scaffolding.
Fogged Windows in Los Angeles: What It Actually Means
A fogged window in a home in Venice or Palms is almost never condensation on the room side of the glass. It’s moisture trapped inside the sealed air space, and it means the seal has failed. No amount of cleaning or defogging spray fixes it permanently. The correct repair replaces the glass unit itself, and we do that work on any brand you have, including PGT and CWS units with their specific seal and spacer designs.
Why Seals Fail and How We Prevent a Repeat
Los Angeles heat is hard on window seals. The daily expansion and contraction cycle, repeated hundreds of times a year, eventually breaks the adhesive bond at the spacer. The replacement glass we install uses a high-grade sealant system rated for coastal and desert climates, and we’ll explain the difference if you want the technical details. Every repair carries a written guarantee; if the repair fails, your second visit is free.
Brands We Service
We install and service windows from PGT, CGI, CWS, and ViewLux, and the reason we carry more than one line is simple: no single brand is right for every Los Angeles house. PGT’s impact-rated windows are the standard for homes that want hurricane-grade strength without steel shutters, and we’ve installed their units in coastal homes where wind-driven debris is a real concern. CWS builds a window that handles heat and UV exposure exceptionally well, which matters in places like Window Replacement - Huntington Park and West Carson where the afternoon sun is relentless.
ViewLux makes a premium line with tight sightlines and clean lines that fit mid-century homes in Studio City and Culver City beautifully. We work with these brands because we know their hardware, their glass packs, and their installation requirements. Whether you have a PGT impact window, a CGI coastal unit, a CWS thermal package, or any other make, we can help.
Signs You Need a Pro Right Now
- Your window won’t lock or close flush. An unlocked window is an open window, and open windows are how a lot of break-ins happen in Los Angeles. If the latch doesn’t seat, the frame or the sash has shifted, and you need a pro to see why before it becomes a real security problem.
- You can feel air moving around a closed window. That draft is your cooled air leaving in summer and outside air coming in, and it’s a sign the weatherstripping, the frame, or the seal has failed. The money it leaks is real: a drafty window can add hundreds to an annual cooling bill in Los Angeles.
- Condensation or fog between the glass panes. This is the classic dead-seal symptom, and it means the window has lost its insulating value. It will only get worse, and in a damp year you may see mold start at the edges of the frame.
- Visible rot, peeling stucco, or soft wood at the windowsill. Water intrusion around a window frame moves fast in Los Angeles winter rains, and what looks like a paint problem is usually a flashing or seal failure. Once rot starts, the repair cost jumps, so we recommend calling before the next rain.
- The window sticks, slams, or drops when you open it. That’s a failed balance or a warped sash, and it’s a finger injury waiting to happen, especially in a house with children. We replace the sash and the balance in the same visit, and the window stays where you put it.
Our Process, Step by Step
- 1
You call, a live person answers. No voicemail, no callback queue, no automated maze. The phone is answered by a real person 24 hours a day, 7 days a week, and you’ll get your questions answered before you hang up. Call (213) 269-5559.
- 2
We measure and assess every opening. A technician comes to your home, checks each window with a digital moisture meter and a thermal probe where needed, and measures to the sixteenth of an inch. We’re also checking the stucco, the flashing, and the framing condition around each opening, not just the window itself.
- 3
You get a written price before any work starts. The quote is line-item, it’s in writing, and it includes materials, labor, stucco work, and haul-away. No surprise change orders, no handshake estimates. The price you read is the price you pay.
- 4
We install, upgrade, or replace with the right product. The technician arrives by appointment, pre-announced by name and photo. The work is done with the right glass, the right frame, and the right flashing for your specific Los Angeles exposure. We pull permits when the job requires one and pass the inspection before we consider the job done.
- 5
We walk the job with you and back it in writing. Before we leave, we inspect every opening with you, test every lock, and make sure you know how the windows operate. Every job is covered by the 365-Day Done Right Promise. If it’s not done right, we make it right.
How Much Does Window Replacement Cost in Los Angeles?
A typical window replacement in Los Angeles runs $650 to $1,400 per window for a standard double-hung or slider installed in an existing opening. A full house, say 12 to 15 windows in a 1,800-square-foot home in Palms, usually lands between $10,000 and $18,000 when you’re using a quality vinyl or fiberglass product. If you want impact-rated windows from a line like PGT or CGI, expect to pay on the higher end, starting around $900 per window and going up from there. A single window glass replacement, by contrast, runs $180 to $520 depending on pane size and glass type.
What affects the price: the number of windows, the size of each opening, the frame material, the glass package (single, dual, low-E, impact-rated), whether stucco repair is needed around the opening, and whether a permit is required. The way to avoid overpaying in Los Angeles is to get a written, line-item quote that separates materials from labor and shows the exact product you’re getting. A free estimate should include a site visit, the measurements, and a written price. That’s exactly what we do, and the estimate is yours to keep whether or not you hire us. Call (213) 269-5559 and get a real number in writing.
Our Service Area Near Los Angeles
Hale Windows Los Angeles serves all of Los Angeles and the surrounding neighborhoods, including Gardena, Studio City, South Gate, Culver City, Palms, Venice, Huntington Park, Lawndale, Westmont, West Carson, and Walnut Park. Most estimates happen within a couple of days of your call, and the technician’s name and photo come to you by text before the appointment. We work around your schedule, not the other way around.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Window Replacement in Los Angeles
Window replacement is the removal of an existing window, frame and all, and the installation of a new unit in the same opening. It’s different from glass replacement, which only swaps the pane and keeps the frame. A full replacement is the right call when the frame is warped, rotten, or so old that new glass won’t fix the real problem.
Most whole-home window replacements take one to three days of on-site work once the windows arrive and the permit is approved. A single window replacement is often done in a half day. The timeline depends on the number of openings, the stucco work needed, and whether the windows were custom-ordered or in stock. Call (213) 269-5559 for an honest timeline on your specific project.
In Los Angeles, window replacement runs $650 to $1,400 per window for standard products, with whole-home projects landing between $9,000 and $22,000. The range depends on the brand, the glass package, the number of openings, and the condition of the existing frames. You’ll get a written, line-item quote from us before any work starts, so the number you read is the number you pay.
Yes. We install and service windows from all four of those brands, and we carry parts, hardware, and glass for their product lines. We also service any other make you have, including original windows from the 1950s and 60s, and we’ll tell you honestly whether a repair or a replacement makes more sense.
When a window is broken or won’t lock, we treat that as an urgent job and move quickly to get you boarded up and scheduled for replacement. If the situation is dangerous, call us any hour, day or night. A live person answers 24/7 and can get you on the schedule fast. Call (213) 269-5559.
It covers the work we do. If something about the installation or the repair is not right, we make it right within 365 days of the job. No argument needed, no negotiation. It’s a named, documented guarantee stamped on every job we do, and it’s the reason we put our own name on the work.
Move furniture and breakables at least four feet away from each window, take down curtains and blinds, and clear a path from the entry door to the windows. For a full checklist, see our Window Replacement Maintenance Checklist for Los Angeles Homeowners. We’ll protect the floors and the work area with drop cloths, and we’ll haul away the old windows and all installation debris. You don’t need to do any demolition or prep work yourself.
Schedule Your Window Replacement Service in Los Angeles Today
Get a written price for window replacement in Los Angeles before you decide anything. Call (213) 269-5559 now and a live person will answer, answer your questions, and schedule your free, no-obligation estimate. You’ll know the price before anyone picks up a tool, and the work carries our 365-Day Done Right Promise. That’s how we’ve done it since 2009, and that’s how we’ll do it for you.
Written by Spencer Odell, Owner at Hale Windows Los Angeles, serving Los Angeles since 2009.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.