VLX 100 Pivot Door

VLX 100 Pivot Door in Los Angeles, CA | Hale Windows Los Angeles

The VLX 100 pivot door turns an entryway into the focal point of the entire home. Instead of swinging on side hinges, the door rotates on a vertical axis set off-center, which allows for dramatically wider panels and uninterrupted glass. In Los Angeles, where indoor-outdoor flow is everything, this door shows up on modern builds in Venice, glass boxes in the Hollywood Hills, and mid-century remodels in Sherman Oaks. Hale Windows Los Angeles is an authorized ViewLux installation partner, which means you get the product, the precise install, and the warranty backing all from one team. Call (213) 269-5559 to talk through your project.

Call (213) 269-5559

Product Overview – VLX 100 Pivot Door

ViewLux builds the VLX 100 for homeowners and architects who want a door that reads as a design decision, not just an opening. The frame is heavy-duty aluminum with a profile width of 2.56 inches, which gives the panel enough structural backbone to carry oversized glass spans. And the panel itself is substantial: up to 60 inches wide and 120 inches tall. That is a five-foot-wide, ten-foot-tall statement piece, and it changes the way a room feels the moment it is installed.

The pivot mechanism is what makes this door different. Because the weight rides on a top and bottom pivot instead of side hinges, the door can be much wider and taller than a traditional hinged unit without sagging over time. The pivot point can be set anywhere along the width of the panel, which changes how the door opens and how much clearance you get on either side. It is a detail architects in Los Angeles use to shape how people move through a space.

We install this door in custom homes from Pasadena to Playa del Rey. The buyers are typically people doing a full remodel or new construction who want clean lines, big glass, and hardware that feels engineered rather than decorative. The VLX 100 delivers that. The aluminum resists the marine air near Santa Monica and the dry heat of the Valley without warping, fading, or rusting the way steel or wood would over time.

Technical Specifications

• Frame wall thickness: 0.098 inches of extruded aluminum, the heavier gauge that keeps these large panels stable.
• Profile width: 2.56 inches, slim enough for a clean sightline but rigid enough for a 120-inch-tall panel.
• Maximum panel span: up to 60 inches wide by 120 inches tall, sized per opening and wind-load calculations for your specific Los Angeles neighborhood and exposure.
• Glass options: Clear, Frosted, Obscure, Low-E, Tempered, and Laminated.
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, and Teak Wood.
• Glazing system: thermally broken aluminum frame rated for NFRC energy performance, glazed with insulated or monolithic glass depending on design and code requirements.
• Installation standard: installed by Hale Windows Los Angeles per AAMA 2400/2410, with AAMA 812 low-expansion foam at all perimeter joints.

Performance Features

Thermal Efficiency. The VLX 100 uses a thermal break inside the aluminum profile, which separates the exterior and interior metal so heat does not conduct straight through the frame. That matters on a west-facing wall in Los Angeles, where afternoon heat gain is real. With Low-E glass, the assembly carries an NFRC-rated energy performance label, which matters if you are pulling permits or chasing an energy credit.

Acoustic Performance. A door this large is only as quiet as its glass package. Laminated glass adds a sound-dampening interlayer that noticeably reduces traffic noise, which makes a difference if you live within earshot of the 405, Sunset Boulevard, or a flight path into LAX. Sound control ratings depend on the exact glass makeup, and we will spec that with you during design.

Airtightness & Weather Seal. Every VLX 100 we install gets an AAMA 812 low-expansion foam sealant around the full perimeter. That is the standard that prevents air from sneaking around the frame. The door also uses a continuous compression gasket system at the panel edges, so even a ten-foot-tall door seals tight when closed.

Waterproofing. Los Angeles does get real rain, especially in El Niño winters, and a pivot door has a bottom pivot point that needs proper flashing and drainage. Our crew details the sill and perimeter so water runs away from the opening, not into your subfloor. The AAMA 2400/2410 installation standard we follow is specifically about watertight integration between window and door units and the surrounding structure.

Wind Resistance. The VLX 100 is wind-load rated, and the exact rating your door carries depends on your home’s exposure zone. A home on a ridgeline in Bel Air or a bluff in Palos Verdes needs a different calculation than a house in the flats of Mid-City. We run those numbers before ordering, not after installation.

Security & Hardware. The pivot hardware is built for a panel this size, with a floor-recessed pivot and top pin that carry the weight without sagging. Multi-point locking keeps the door rigid when closed, and the impact-resistant laminated glass option adds a security layer we recommend for ground-floor entries and street-facing doors anywhere in Los Angeles.

Color & Glass Options

The VLX 100 comes in six finishes, and each one reads differently against Los Angeles architecture. Premium Black is the most requested finish we see for modern builds in Silver Lake and Echo Park, where the dark frame against white stucco or wood siding gives you that crisp contrast. Anodized Silver and Pure White are quieter, and they work well on coastal properties in Manhattan Beach and Marina del Rey where lighter facades keep the line clean. Bronze and Champagne land nicely on Mediterranean and Spanish-style homes, giving warmth without heavy ornament. Teak Wood is a wood-grain finish on the aluminum frame, which gives you the look of timber at the entry without the maintenance wood demands in LA’s sun and salt air.

Glass choice depends on what the door is doing for you. Clear tempered glass maximizes the view and the indoor-outdoor connection. Low-E cuts heat gain while staying nearly transparent, and it is our default recommendation for south- and west-facing entries in Los Angeles. Frosted and Obscure glass give you privacy without blocking light, which suits entries close to the street or a neighbor. Laminated glass is the upgrade for noise control, impact resistance, and added security, and it can be combined with Low-E for a single high-performance unit.

Installation by Hale Windows Los Angeles in Los Angeles

We will be direct with you: the install is where pivot doors go wrong more often than any other part of the process. A pivot door carries hundreds of pounds on a floor pivot and a top pin, and if the opening is not perfectly level, plumb, and square, the panel will bind, scrape, or sag within months. We have corrected doors installed by other contractors who skipped the prep work. It is an expensive fix, and in many cases the manufacturer warranty is already void by the time we get the call.

Our install process for every VLX 100 starts with a pre-install inspection of the rough opening. We check the concrete or framing for level across the full width and height, because a 60-by-120-inch panel magnifies any deviation. We shim, set, and fix the frame to be level, plumb, and square before the door ever goes on the pivots. The perimeter then gets AAMA 812 low-expansion foam sealant around every joint, which expands to fill gaps without bowing the frame, then cured, trimmed, and detailed for a clean line. We follow AAMA 2400/2410 standards on the full installation: flashing, sill pan where needed, drainage, and integration with the surrounding wall assembly.

After the frame is set and sealed, we hang the panel, adjust the pivot hardware, and tune the door so it swings smoothly across its full range of motion. Then we run a water test, check the locking, and walk you through operation and maintenance. The result is a door that functions day one and does not develop issues once the first Los Angeles heat wave or rainy season hits.

One Los Angeles-specific note: if your home is in a hillside zone or coastal overlay, your permit may require engineering stamps or specific wind-load documentation on the door. We handle that paperwork as part of the install.

Frequently Asked Questions – VLX 100 Pivot Door

Get a Quote – VLX 100 Pivot Door in Los Angeles

The VLX 100 is a custom product, and the right way to start is with a free on-site measurement and a written, line-item quote. We will spec the size, glass, and finish for your home in Los Angeles and give you a firm price before anything is ordered. Call (213) 269-5559 to schedule your free estimate with Hale Windows Los Angeles.

Written by the team at Hale Windows Los Angeles, an authorized ViewLux installation partner serving the greater Los Angeles area.