VLX 100 Bifold / Folding Door

VLX 100 Bifold / Folding Door in Los Angeles, CA | Hale Windows Los Angeles

The VLX 100 bifold door is an accordion-style aluminum system that folds panel by panel to open up an entire wall. In Los Angeles, where indoor-outdoor living is the whole point of home design, this door turns a dining room or living room into open air in about ten seconds. Hale Windows Los Angeles is an authorized ViewLux installation partner serving homeowners across LA County, from Silver Lake to Sherman Oaks to Manhattan Beach. We measure, order, install, and stand behind the result. Call (213) 269-5559 to start a quote on a VLX 100 for your home.

Call (213) 269-5559

Product Overview – VLX 100 Bifold / Folding Door

The VLX 100 is built for one thing: removing the barrier between inside and outside. Unlike a sliding door that leaves half the opening closed no matter what, this bifold stacks its panels flat against the jamb and clears the full width. In a Los Angeles home with a patio, pool, or canyon view, that difference is everything. You get a true wall-to-wall opening, which changes how a room feels and how you use it.

The frame is extruded aluminum with a wall thickness of 0.098 inches. That is thicker than what you’ll find on most entry-level bifolds sold in the LA market, and it matters. Thinner profiles flex under their own weight over time. This one does not. Each panel is 2.56 inches wide at the profile, which keeps sightlines clean while giving the door enough structural mass to span up to 20 feet in total width. Homeowners choose this series when they want a modern look without sacrificing long-term rigidity.

Hale Windows Los Angeles installs the VLX 100 as a complete system: panel hardware, track, weather seals, and glass assembled to spec. Because we are an authorized ViewLux partner in Los Angeles, we order directly from the manufacturer and install per their published AAMA standards. No third-party resellers, no substituted parts, no guesswork. Whether you’re renovating a Spanish-style home in Los Feliz or finishing a new build in Culver City, this door does the architectural heavy lifting.

Technical Specifications

• Frame material: Extruded aluminum, 0.098″ wall thickness
• Panel profile width: 2.56 inches
• Maximum opening width: Up to 20 feet, depending on panel count and site conditions
• Track configurations: 2-panel, 3-panel, 4-panel, 5-panel, or 6-panel systems
• Glass options: Clear, Low-E, Tempered, Laminated, Gray Tint, Black Tint
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Retractable screen or none
• Performance: NFRC-rated thermal performance, wind-load rated, AAMA 2400/2410 compliant installation

Performance Features

Thermal Efficiency. The VLX 100 frame includes a thermal break that separates the interior and exterior aluminum faces. That break interrupts heat transfer, so your Los Angeles home does not bake in August or leak heat in December. Combined with Low-E glass, the door carries NFRC-rated performance numbers we can review with you before you order.

Acoustic Performance. If your home sits near the 101, the 405, Sunset Boulevard, or any of LA’s busier corridors, glass choice matters. Laminated glass cuts road noise noticeably compared against standard clear glass. We can walk you through the options during your free on-site measurement.

Airtightness & Weather Seal. Every perimeter joint gets sealed with AAMA 812 low-expansion foam during installation. This closes the micro-gaps that let drafts in and conditioned air out. It also prevents the whistling sound cheaply installed bifolds make on windy days.

Waterproofing. Los Angeles gets most of its rain in a handful of winter storms, which means your door has to handle focused downpours after months of dry heat. The VLX 100’s interlocking panel seals and sill design are built for that cycle. We set the sill level, test for drainage, and verify the seal with a water test on every install.

Wind Resistance. The door is wind-load rated for local climate requirements. In foothill and canyon areas like Studio City or Pasadena, gust conditions can exceed what a standard patio door is tested for. The VLX 100’s panel thickness and hardware rating give it the reserve capacity those homes need.

Security & Hardware. Multi-point locking hardware keeps each folding panel engaged with the track and jamb. That matters in Los Angeles, where ground-floor glass doors are a known entry point. Tempered glass is standard for safety; laminated is available where impact resistance is a priority.

Color & Glass Options

The VLX 100 comes in six finishes. Premium Black is the most popular choice we see in Los Angeles right now, especially on modern and mid-century homes in the hills. Pure White reads clean and bright on coastal properties in Venice and Santa Monica. Anodized Silver fits industrial lofts and commercial storefronts downtown. Bronze sits well on traditional dark-trimmed homes in Hancock Park and Windsor Square. Champagne works beautifully on warm stucco exteriors. Teak Wood gives the aluminum frame a wood look without the maintenance of real timber, which holds up in LA sun without warping or fading.

On glass, Low-E is the sensible default for Los Angeles. It cuts solar heat gain and protects furniture from UV fading. Tempered glass meets code for door panels. Laminated glass adds impact resistance and real noise reduction. If you want extra daylight control, Gray Tint and Black Tint darken the pane while maintaining the view. We will spec the right combination during your consultation.

Installation by Hale Windows Los Angeles in Los Angeles

Most bifold door failures in Los Angeles are not door problems. They are installation problems. A door that is set 3/16″ out of level will bind on the track within a year. A perimeter joint sealed with the wrong foam will leak in the first winter storm. A poorly shimmed jamb will pull screws loose over time. This is the reality we fix for homeowners who bought from other installers.

And it is the reason ViewLux partners with us. Hale Windows Los Angeles installs the VLX 100 to AAMA 2400/2410 standards. In practical terms, that means:

• We inspect the rough opening before ordering, including header condition, flooring plane, and adjacent wall framing
• We set the frame level, plumb, and square using laser equipment, not a bubble level
• We seal all four perimeter joints with AAMA 812 low-expansion foam and a proper waterproofing membrane
• We water-test the track and sill before trim goes back on
• We test every panel fold, lock, and seal, then walk you through operation and care

Los Angeles homes add their own wrinkles. Stucco exteriors require careful flashing integration at the sill and head. Hillside homes often sit on piers or post-tension slabs that shift slightly with the seasons. Older homes in neighborhoods like Silver Lake and Echo Park may have out-of-square openings that need correction before any door goes in. We plan for these conditions during the pre-install inspection because it is cheaper to address them before the door arrives than after.

Improper installation voids the manufacturer warranty. That is not a scare tactic; it is written into the warranty terms. When Hale Windows Los Angeles installs your VLX 100, the warranty stays intact and we are accountable if anything goes wrong.

Frequently Asked Questions – VLX 100 Bifold / Folding Door

What is the lead time for the VLX 100 Bifold / Folding Door? Most VLX 100 orders arrive at our Los Angeles warehouse in 4 to 7 weeks from order confirmation, depending on finish, glass type, and panel configuration. Custom sizes and tinted glass add time. We confirm the current lead time before you sign anything, and we schedule your install date around the delivery, not the other way around. Call (213) 269-5559 and we’ll give you a real date range for your specific configuration.

Does the VLX 100 qualify for energy tax credits? It depends on the glass package and the project scope. Low-E glass packages with qualifying NFRC ratings can make the door eligible for energy efficiency incentives when documented properly. We provide the paperwork you need to claim what applies. Exact qualification depends on current federal and California programs, which change year to year, so call (213) 269-5559 and we’ll check your configuration against the current rules.

What warranty comes with the VLX 100 Bifold / Folding Door? The VLX 100 carries the ViewLux manufacturer warranty on materials, hardware, and finish, and it stays valid when an authorized partner like Hale Windows Los Angeles performs the installation. Our workmanship is covered separately by our own install guarantee. We will give you the warranty terms in writing before installation begins so there are no surprises.

Can I customize the size of the VLX 100 Bifold / Folding Door? Yes. The VLX 100 is built to your opening dimensions, not sold in fixed stock sizes. You choose the panel count, the panel widths, the finish, the glass, and the screen option. Maximum total span is 20 feet. We measure your Los Angeles opening free of charge, verify the header can carry the load, and order the door to fit the structure as it actually is.

How do I maintain aluminum frames? Wash the frames and track with mild soap and water every few months, and keep the bottom track clear of leaves and debris. In Los Angeles, coastal salt air near the beach and dust inland both collect on the track, so a quick wipe keeps panels gliding smoothly. Use a silicone-based lubricant on hinges and rollers once or twice a year. The powder coat finishes are low maintenance by design and will not rot, warp, or need repainting. Call (213) 269-5559 if you ever have a hardware question after installation.

Get a Quote – VLX 100 Bifold / Folding Door in Los Angeles

If you’re ready to open up a wall in your Los Angeles home, we’re ready to measure it. Hale Windows Los Angeles is an authorized ViewLux partner, and we provide free on-site measurements, written line-item quotes, and installation that protects your warranty. Call (213) 269-5559 today to schedule yours and start the conversation.

Written by the team at Hale Windows Los Angeles, authorized ViewLux installation partner serving Los Angeles, CA. Free on-site measurements and written quotes available throughout LA County.