New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Impact Garage Doors: The Los Angeles Owner’s Guide
If you have a Therma-Tru impact garage door that’s failed or is starting to fail, here’s the straight answer: we stock Therma-Tru-compatible impact door parts on our trucks across Los Angeles, and a full replacement door typically runs $2,400 to $6,800 installed depending on size, series, and hardware condition. Most owners discover the problem two ways: the door suddenly feels heavy or binds mid-track, or a visible crack appears along the bottom rail after a hard season of sun and salt air. Either way, you’ll want it looked at before the next Santa Ana wind event tests what’s left of that impact rating.
Which Therma-Tru Models This Applies To
Therma-Tru’s impact-rated door lineup falls into a few families you’ll recognize from the door edge label or the original paperwork. The Classic-Craft and Fiber-Classic series both offer impact-rated fiberglass slabs, and the Pulse and Smooth-Star lines have impact-glass options that show up on garage-to-house transition doors and carriage-style front entries. The compatibility gotcha we see most often in Los Angeles: Therma-Tru stamps the impact rating on the door edge with a small etched label that includes the design pressure (DP) rating and the impact certification number. If that label is painted over or worn off, you’re guessing, and we won’t sell you a part based on a guess.
Here’s what matters for matching parts: measure the slab thickness (usually 1-3/4″ for impact-rated Therma-Tru doors), check the hinge prep spacing, and confirm whether you have the Tru-Defense impact system or a standard core with impact glass. OEM Therma-Tru parts come with exact series matching, but quality aftermarket equivalents from suppliers we’ve vetted over the years often match OEM spec at 30-40% less. We’ll tell you which is which before you spend a dollar. One more thing worth knowing: Therma-Tru changed hinge boring patterns on the Fiber-Classic line in 2019, so a 2018 door and a 2020 door are not automatically interchangeable even if they look identical.
Signs Your Therma-Tru Impact Garage Doors Is Failing
- The door feels 20 pounds heavier than it did last season. Impact-rated Therma-Tru doors are already heavier than standard doors because of the reinforced core. When the spring or cable starts to go, that extra weight lands on you, not the hardware. You’re feeling the spring losing tension.
- You hear a sharp snap, then the door won’t lift evenly. That’s a torsion spring failure. On impact-rated doors, the springs are rated for a specific door weight, and a generic replacement from a hardware store will not hold it. The door will ride crooked and eat the tracks.
- The bottom rail shows hairline cracks spreading from the corners. Los Angeles sun breaks down the fiberglass skin over time, especially on west-facing garage doors in neighborhoods like Mar Vista or Westchester. Once a crack runs through the bottom rail, water gets into the core and the impact rating is compromised.
- The door closes too fast or slams at the last inch. That’s the auto-reverse or the closer circuit losing calibration. On impact doors, a hard slam isn’t just annoying; it stresses the glass retention system that keeps laminated impact glass seated in the frame.
- You see daylight through the top corners or along the sides. The weatherstripping and the slab have drifted out of alignment. On a Therma-Tru impact door, a gap here means the air-infiltration rating is gone, and your attic or garage is now open to whatever the LA basin throws at it in October.
Replacement Cost & What’s Included
A full Therma-Tru impact garage door replacement in Los Angeles runs $2,400 to $6,800 installed. The spread comes down to three things: door size (a single-car door is $2,400-$3,600; a double runs $3,800-$6,800), which series you’re matching (Fiber-Classic is the value end; Classic-Craft with impact glass is the top), and whether the tracks, springs, and opener hardware are still serviceable. Here’s the line-item breakdown:
- Impact-rated door slab (parts only): $1,200 to $3,900 depending on series and size
- Labor including removal, haul-away, and hang: $500 to $900
- New torsion springs rated to the door weight: $250 to $450 per pair
- Track and hardware replacement (if needed): $300 to $600
- Weatherstripping and seal kit: $90 to $180
Every quote from Hale Windows Los Angeles is written down before we pick up a tool. The price we hand you is the price you pay, no change orders. And every repair or replacement carries our written guarantee; if it fails, the second visit is free. That’s the 365-Day Done Right Promise.
DIY or Call Us?
Some parts of this job you can safely inspect yourself. Check the door edge label, measure the slab thickness, and test the balance by disconnecting the opener and lifting the door halfway. If it holds at the halfway point, the springs are okay. If it drops or shoots up, the springs are done and the door is dangerous to work on. Torsion springs under that much load can break bone. We don’t recommend any DIY work on impact-door hardware, tracks, or springs. One mistake with the tension on a 200-pound impact-rated slab and you’re in urgent care instead of your garage. Call us at (213) 269-5559 and we’ll have a background-checked, photo-badged technician at your door, named and pictured before they arrive.
FAQs
Plan on 15 to 20 years for the slab itself in Los Angeles, but springs and cables typically need replacement at the 7 to 10 year mark, sooner if the door faces direct afternoon sun or sits within a mile of the coast where salt air accelerates metal fatigue. The impact-glass retention system holds up well, but the fiberglass skin on south-facing doors in neighborhoods like Sherman Oaks or Studio City will show UV wear earlier than shaded installations. Call (213) 269-5559 and we’ll tell you honestly whether you need a part or a full slab.
If the failure is in the springs, cables, tracks, or weatherstripping, repair usually makes sense and costs $300 to $1,100. If the slab itself is cracked through the bottom rail, delaminating, or the impact glass is fogged, replacement is the better call because the impact rating is gone and no patch restores it. We’ll show you the difference with the door in front of us before you decide.
Most replacements are done in 4 to 6 hours from truck arrival to final balance test. We bring the door, hardware, and disposal on the first trip, so there’s no second visit for parts. If your opening has settled or the framing needs correction, we’ll flag that during the free estimate and price it in writing upfront.
Yes, our service trucks in Los Angeles carry Therma-Tru-compatible springs, cables, hinges, rollers, and weatherseals for the most common impact-rated series. If we need a series-specific slab or specialty hardware, we order it from our local distributor and typically have it in 3 to 5 business days. We also service PGT, CGI, and CWS impact products from the same trucks.
If your Therma-Tru impact garage door is failing, don’t wait for it to fail completely. Call (213) 269-5559 to schedule a free estimate. We’ll put the price in writing, tell you exactly who’s coming to your door, and stand behind the work for a full year.
Written by Spencer Odell, Owner, Hale Windows Los Angeles at Hale Windows Los Angeles, serving Los Angeles and nearby areas.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.