New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Window Installation: The Los Angeles Owner’s Guide
If you have a Mr-Glass window or door and the installation is failing, we stock the parts and do the fix. A typical Mr-Glass window installation in Los Angeles runs $180 to $520 installed, and we can usually get it done same-day or next-day because we keep common Mr-Glass hardware on the truck. Most owners notice the problem as a sash that won’t stay up, a lock that no longer catches, or a draft that wasn’t there last season. Left alone, a failing installation wears out the surrounding frame and can turn a $200 fix into a $900 replacement.
Key takeaways:
- We install and service Mr-Glass window hardware across Los Angeles, from San Pedro to Sylmar.
- Installed pricing is written down before we start. No surprises on the invoice.
- Every replacement carries a written guarantee. If it fails, the second visit is free.
- You’ll know your technician’s name and see their photo before they arrive.
Which Mr-Glass Models This Applies To
Mr-Glass is a professional-grade line we know well because we’ve installed and serviced it across the LA Basin for years. The installation parts we handle cover fixed and operable windows, sliding glass doors, and swing doors. The compatibility gotcha with Mr-Glass is that roller assemblies and locking hardware changed between older and newer series, so a part that looks identical from across the room may not fit. A 2009-era Mr-Glass sliding door uses a different roller housing depth than the current production. We match by measuring the existing hardware, not by guessing from a photo.
Here’s what to look for on your unit: a small sticker or etching on the frame or glass edge with the model code, and measurements of the sash width and roller channel. If the sticker is gone, the physical dimensions still get us there. For most Mr-Glass hardware, we recommend OEM or equivalent-grade aftermarket parts from known suppliers rather than cheap universal kits. Universal parts are usually why a repair fails a second time within a year. We’ve pulled universal rollers out of Mr-Glass tracks that were never the right diameter in the first place.
Signs Your Mr-Glass Window Installation Is Failing
- The sash is hard to slide or won’t stay open. This is almost always a worn roller or a bent track. A roller with a flat spot drags, and the extra force you use to muscle it open wears out the lock next. Fix the roller early and the track stays intact.
- The lock doesn’t align or catch. If the sash sits slightly out of square, the lock tongue misses the keeper. This often traces back to a failed installation component, not the lock itself. Replacing the lock without fixing alignment means the new one fails too.
- You feel air moving around the edges on a calm day. Weatherstripping flattened over time lets air through. In Los Angeles, UV and dry heat bake rubber and vinyl seals faster than most coastal climates. A tight seal is also your first line of defense against dust and street noise.
- Condensation or haze between the glass panes. This means the seal on the insulated glass unit is gone. The installation frame may be fine, but the unit needs replacement to restore clarity and thermal performance.
- The frame has visible cracking or the corner joints are separating. Mr-Glass frames are tough, but a sustained lean from a sagging sash or shifting house foundation in hillside areas like Mount Washington or Eagle Rock puts stress on the corners. Once a joint opens, water gets in and the damage compounds.
Replacement Cost & What’s Included
In Los Angeles, you’ll typically pay $180 to $340 for a roller, lock, or weatherstripping replacement on a standard Mr-Glass window, installed. Sliding glass door hardware runs higher, generally $280 to $520, because the rollers are larger, the doors are heavier, and the track often needs realignment as part of the job. At the top end, a full insulated glass unit replacement lands between $450 and $900 depending on size and low-E coating.
What that includes: the part, the labor, disposal of the old component, and a written line-item quote before we start. You’ll see the part cost and the labor cost separately, and that number does not change unless we find something structural and call you first. Every replacement is covered by our written workmanship guarantee, and the whole job sits under our 365-Day Done Right Promise: if it’s not right, we make it right. No argument needed.
- Roller or lock replacement: $180 – $340
- Sliding door roller and track service: $280 – $520
- Insulated glass unit replacement: $450 – $900
- Written quote before work starts: included
- Workmanship guarantee: included on every repair
DIY or Call Us?
You can check the track for debris, clean out dust and grit, and confirm the model sticker is still legible. That helps us quote accurately. But swapping rollers and realigning a Mr-Glass sash is where DIY gets expensive. The sash is heavy, the tension on the hardware is specific to the model, and a dropped corner or a forced roller can bend the track or crack the frame. Sliding glass doors are the real hazard: a full glass panel off its track weighs enough to seriously injure someone, and it needs to come out in a controlled way. If you’re not set up for it, don’t. Call (213) 269-5559 and we’ll send someone who is.
FAQs
Rollers and weatherstripping typically last 10 to 15 years in LA’s dry heat, with coastal homes near Playa del Rey or San Pedro seeing faster wear from salt air. Insulated glass units can hold their seal for 15 to 25 years, though sun exposure on unshaded west-facing walls shortens that. A visual check every couple of years catches most failures early.
Occasionally a roller can be cleaned and re-lubricated, or a latch can be adjusted back into alignment. But if there’s visible scoring on the track or a flat spot on the roller, replacement is the honest fix. We’ll tell you which one applies and put it in writing before any work starts. Call (213) 269-5559 for an exact diagnosis.
Most single-window hardware replacements take 45 minutes to 90 minutes once we’re on site. A sliding glass door service typically runs 1 to 2 hours because it includes track cleaning and final alignment. You’ll get a time window when you book, and we call before the technician arrives.
We carry common Mr-Glass rollers, locks, and seals on our service trucks, so we can usually complete the fix on the first visit. Specialty sizes or less common series may take 2 to 5 business days to source. When parts need ordering, we confirm the exact price and timing before we schedule the install.
Written by Spencer Odell, Owner, Hale Windows Los Angeles at Hale Windows Los Angeles, serving Los Angeles and nearby areas.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.