New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Door Installation: The Los Angeles Owner’s Guide
ECO Window Systems door installation in Los Angeles typically costs $850 – $1,900 including parts, labor, and haul-away of the old unit, and we can usually complete the swap in a single visit once we’ve confirmed the model. Most owners discover a problem the same way: a door that suddenly drags against the frame, a lock that no longer catches, or condensation fogging between the glass panels. We stock ECO Window Systems-compatible hardware and full door slabs on our trucks for the most common Los Angeles installations, which keeps the job from turning into a two-week backorder.
If your ECO door is binding, leaking air, or just won’t seal right anymore, here’s what you need to know before you spend a dollar.
Which ECO Window Systems Models This Applies To
ECO Window Systems builds sliding patio doors, hinged French doors, and multi-point locking entry doors across several series lines sold throughout Southern California. The trick with ECO specifically is that hinge hardware and roller assemblies changed between manufacturing runs, so the year your door was made matters more than the model name printed on the glass. We identify the exact part by pulling the hinge leaf or roller housing and reading the stamped code, then we match it against the ECO compatibility chart before ordering anything.
One thing Los Angeles homeowners should know: ECO doors installed within ten miles of the coast are exposed to salt air that accelerates roller bearing wear. In Marina del Rey and Playa del Rey, we replace ECO sliding door rollers roughly twice as often as the same models in Sherman Oaks or Glendale. If your door is original to a 1990s or early 2000s build, there’s a strong chance the rollers are no longer manufactured. We carry quality aftermarket equivalents machined to the same dimensions for those discontinued parts, and we’ll tell you plainly when OEM is worth the wait versus when an aftermarket part will perform identically.
Signs Your ECO Window Systems Door Installation Is Failing
- The door scrapes or drags when you open it. Worn ECO rollers or a sagging hinge have dropped the slab just enough to contact the track or threshold. Every scrape removes material and makes the eventual repair more involved.
- The lock no longer lines up with the strike plate. Multi-point ECO locks depend on perfect alignment. When the door settles, those locking pins miss their slots and you lose the security you paid for.
- You feel a draft at the bottom corner even when the door is closed. The weatherstrip has compressed or torn, but sometimes the real culprit is a frame that has shifted out of square, which a new sweep alone won’t fix.
- Condensation or haze between the glass panels. The ECO insulated unit has lost its seal. The glass is still structurally fine, but you’re losing thermal performance and the fog won’t go away on its own.
- The door requires a hard yank or hip-check to close. The frame or slab has warped, or the threshold has moved. Forcing the door damages the hardware and the jamb over time.
Replacement Cost & What’s Included
Here’s what we charge in Los Angeles, in writing, before any work starts:
- Full ECO sliding door replacement (standard 60″ or 72″): $1,200 – $1,900 installed
- ECO hinged entry door replacement (36″ single door): $850 – $1,400 installed
- Roller or hinge hardware replacement only: $180 – $340 depending on the part
- Weatherstrip and threshold seal replacement: $120 – $260
- Insulated glass unit replacement (seal failure): $350 – $650 per panel
The spread comes down to what we find when we pull the old door: rough opening size, frame condition, and whether the surrounding stucco or drywall needs patching after the swap. You get a written price before we touch anything, and if the scope changes, you approve the change in writing before we proceed. Every ECO door installation we perform carries our written guarantee, and the entire job is covered by our 365-Day Done Right Promise: if it’s not right, we make it right, no argument needed.
DIY or Call Us?
Adjusting an ECO door’s roller height or tightening hinge screws is a reasonable homeowner task, and we’ll walk you through it over the phone if you’d like. But removing and re-hanging a full door slab, especially a multi-point locking ECO entry door, is where we see DIY repairs turn into broken glass, damaged frames, and doors that never close right again. A sliding glass panel can weigh well over 150 pounds, and if it leaves the track while you’re wrestling it, you’re looking at a hospital visit or a shattered panel.
Measure it right the first time, or you’ll be measuring it twice and paying for it either way. That applies to rough opening dimensions and roller specs alike. If your ECO door is beyond a simple adjustment, call (213) 269-5559 and we’ll send a technician who has already matched the part before he knocks.
FAQs
ECO Window Systems doors in Los Angeles typically last 15 – 25 years before needing replacement, but coastal exposure in places like Venice or San Pedro can shorten that to 10 – 15 years for hardware and weatherseals. With regular roller and seal maintenance, the slab and frame often outlast the moving parts. Call (213) 269-5559 and we’ll assess what’s actually worn versus what’s still solid.
Yes, in most cases. Rollers, hinges, weatherstrip, thresholds, and insulated glass units are all replaceable on ECO doors. Replacement only makes sense when the frame or slab itself has warped or rotted, which we see most often in older Los Angeles homes where irrigation overspray has been hitting the door for years. We’ll tell you which option costs less and lasts longer, not which one makes us more money.
A standard ECO door swap takes 3 – 5 hours on site, including removing the old unit, prepping the rough opening, installing the new door, and hauling away debris. If the job requires stucco or drywall repair around the frame, expect a second visit for finishing work. We’ll give you a timeline in writing before we start.
We stock the most common ECO rollers, hinges, locksets, and weatherseals on our trucks for same-day installation across Los Angeles. Less common or discontinued parts typically arrive within 3 – 7 business days. We also stock parts for PGT, CGI, and CWS doors, so we can often match an older ECO unit to a compatible part without a factory order. Call (213) 269-5559 with the model number from the glass etching and we’ll confirm availability immediately.
Call for a Free ECO Door Installation Estimate
If your ECO Window Systems door is dragging, leaking, or refusing to lock, don’t wait until the hardware fails completely. Call (213) 269-5559 for a free estimate from a specialist who knows ECO doors specifically. Written price first, background-checked technician at your door, and the 365-Day Done Right Promise behind every installation.
Written by Spencer Odell, Owner, Hale Windows Los Angeles at Hale Windows Los Angeles, serving Los Angeles and nearby areas.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.