New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Window Installation: The Los Angeles Owner’s Guide
If you have a PGT window that needs installation or a failed part replaced, we stock PGT-compatible components and install them across Los Angeles, typically for $220 – $640 per window depending on the part and model. Most PGT window part replacements take under two hours once we’re on site, and we carry the most common PGT hardware on our trucks so we’re not making you wait on a parts order. The way most Los Angeles homeowners discover they need this page is simple: a window that won’t lock, won’t stay open, leaks air around the sash, or has a cracked pane that’s starting to fog between the glass.
PGT windows are common in Los Angeles because they’re built for impact and wind resistance, but that doesn’t mean they never wear out. The parts that fail most are the ones that move: balances, rollers, locks, and weatherstripping. When one of those goes, the window still “works” in the sense that it’s in the wall, but it’s not sealing, not locking, or not staying put. That’s the moment to deal with it, before a small part turns into a bigger problem.
Which PGT Models This Applies To
PGT makes several window lines, and the parts are not interchangeable across all of them. The series you’re most likely to encounter in Los Angeles homes are the WinGuard (impact-rated), SpectraGuard, and ClassicVue lines. Each series uses different balance systems, lock styles, and sash dimensions. The WinGuard line, for example, uses a heavier balance than the ClassicVue because the impact glass weighs more. If you put a ClassicVue balance in a WinGuard sash, the window won’t stay up and the part will wear out inside a year.
To identify what you have, look for the PGT sticker on the head of the frame or the side of the sash. It will list the series name and usually a manufacturing date code. If the sticker is gone (sun and heat in Los Angeles take those off within a few years), we can match the part by measuring the sash weight, the balance shoe profile, and the lock mounting pattern. That’s the difference between an OEM match and a guess. We also handle quality aftermarket equivalents from CWS, ES Windows, and CGI where they’re genuinely compatible, but for PGT windows we usually recommend staying with PGT or a matched equivalent, because the tolerances are tight and a generic part that “almost fits” will fail early.
Signs Your PGT Window Installation Is Failing
- The sash drops or slams when you open it. This is a failed balance system. The spring or block-and-tackle mechanism inside the frame has worn out, and the window can’t hold its position. In PGT windows, this is often accelerated by years of heat exposure breaking down the internal lubricant.
- The window won’t lock, or the lock feels stiff and gritty. The lock keeper or the lock itself is worn, or the sash has shifted out of alignment so the two halves don’t meet. PGT’s multipoint locks on the WinGuard line are precise pieces; when they’re off even 1/8″, they bind.
- You feel a draft even when the window is closed. Weatherstripping has compressed or torn. In Los Angeles, the dry heat plus sun exposure on west-facing walls makes weatherstripping brittle faster than it does in milder climates.
- Condensation or haze between the glass panes. This means the seal on the insulated glass unit (IGU) has failed. The glass is fogging from the inside, and no amount of cleaning fixes it. The IGU needs to be replaced, not the whole window.
- The window is hard to open or close, or it sticks partway. Rollers or glides are shot, or the frame has shifted. Forcing it usually makes the problem worse by bending the hardware or scoring the track.
Replacement Cost & What’s Included
In Los Angeles, PGT window part replacement and installation typically runs from $220 to $640 per window, depending on what’s failed. Here’s how that breaks down:
| Part | Typical Installed Cost |
|---|---|
| Balance system (per window) | $220 – $340 |
| Lock or lock keeper | $180 – $280 |
| Weatherstripping (full window) | $160 – $260 |
| Rollers or glides | $180 – $320 |
| Insulated glass unit (IGU) replacement | $380 – $640 |
The range depends on the series (WinGuard parts cost more than ClassicVue because the hardware is heavier-duty), whether the window is accessible from inside or requires a ladder, and whether the part is OEM or a matched equivalent. Every quote is written and in your hands before we start: parts, labor, and any disposal fee, itemized. No change orders, no “we found something else” surprise at the end. That written quote includes our workmanship warranty, and the whole job carries the 365-Day Done Right Promise: if it’s not right, we make it right.
DIY or Call Us?
There are a few things you can safely check yourself: look at the weatherstripping to see if it’s visibly torn or flat, confirm the lock moves freely by hand, and note whether the window is dragging on one side or both. What you shouldn’t do is try to disassemble the sash or the balance system yourself. PGT balance assemblies are under spring tension, and the heavier WinGuard units carry enough stored force to injure a hand or send the sash into the frame. I’ve pulled broken balance springs out of walls where a homeowner tried to force it, and the fix cost more than the original repair would have. If the window is fighting you, stop and call us at (213) 269-5559. The estimate is free, and we’ll tell you honestly whether it’s a quick fix or a bigger job.
FAQs
Most PGT hardware lasts 10 to 15 years in Los Angeles before something wears out, with heat and sun exposure on west- and south-facing walls being the main accelerant. Balances and weatherstripping usually go first; the glass itself can last decades if the seal holds. If your windows are 12-plus years old and you’re noticing stiffness or drafts, you’re in the normal wear window. Call (213) 269-5559 and we’ll assess the actual condition rather than guess.
It depends on the part. Locks can sometimes be cleaned and realigned, but balances, rollers, and weatherstripping are replacement items once they’ve failed. Fogged glass always means a new IGU, because the seal can’t be restored. We’ll tell you which path applies to your window during the free estimate, and we won’t sell a replacement where a repair does the job.
Most single-window part replacements take under two hours once we’re on site. IGU replacements take longer because the glass has to be ordered to size, but the installation itself is typically a one-day job. We’ll give you a written time estimate with your quote. Call (213) 269-5559 to schedule a free estimate and we’ll walk you through the timeline.
We stock the PGT components that fail most often on our trucks: balances, locks, weatherstripping, and rollers for the WinGuard, SpectraGuard, and ClassicVue lines. IGU replacement glass is ordered per window because the sizing is specific to the frame. For less common failures, we source OEM or matched-equivalent parts from our supplier network, which keeps turnaround times short in Los Angeles. Call (213) 269-5559 and we’ll confirm availability for your exact model.
Why Los Angeles Homeowners Call Hale Windows Los Angeles
We’re independently owned and operated, part of the Threshold Group family of home-service brands, and we’ve been doing this work in Los Angeles since 2009. We’re not affiliated with PGT, but we’ve been installing and repairing their windows long enough to know the quirks of every series. Before we arrive, you get the technician’s name and photo so you know exactly who’s at your door. You get a written price before any work starts. And if it’s not done right, the 365-Day Done Right Promise means we make it right, no argument needed. Spencer Odell, our owner, grew up in Silverlake and trained at Los Angeles Trade-Technical College, and he’s the guy who taught us: measure it right the first time, or you’ll be measuring it twice and paying for it either way.
Call (213) 269-5559 for your free estimate. A live person answers every call, 24 hours a day, 7 days a week.
Written by Spencer Odell, Owner, Hale Windows Los Angeles at Hale Windows Los Angeles, serving Los Angeles and nearby areas.
Six Reasons Homeowners Choose Hale Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.